ARDEX S 1 K - One-Component Waterproofing and Crack Isolation Membrane

ARDEX S 1 K - One-Component Waterproofing and Crack Isolation Membrane

ARDEX S 1-K™ One-Component Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile installations. It also provides an excellent bonding layer for ARDEX tile and stone setting materials. ARDEX S 1-K can also be used for crack isolation up to 1/8″ (3 mm)*.

Key Features

Flexible, topside waterproofing for interior floors and walls
Very easy-to-apply, 2-coat system; paint roller or brush
Easy to install with a paint roller or brush
Use for bathrooms, showers and other wet areas prior to the installation of tile
Highly workable consistency; minimal drips and splatters
Crack isolation up to 1/8″ (3 mm)
Bonds to a wide range of substrates

Standards

SystemOne™
Meets or exceeds ANSI A118.10
Meets or exceeds ANSI A118.12
IAPMO

Spesifikasjon

Installation
Mixing Ratio: Single-component mix. Do not dilute or mix with additives.
Approx. Coverage:
195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall
56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall *
Coverage will vary with substrate surface profile, porosity and texture.
Performance
Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours
Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).
VOC: < 1 g/L, calculated SCAQMD Methods
Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months
Warranty: ARDEX L.P. Standard Limited Warranty applies.

Tekniske spesifikasjoner

Unik ref.ARDEX-S-1-K
ProduktfamilieTile & Stone Installation System
ProduktgruppeWaterproof Coating for Masonry Surfaces
TypeObjekt (enkelt objekt)
Utgivelsesdato2019-11-07
Utgavenummer1

Lenker

Produktets nettadressehttps://www.ardexamericas.com/product/ardex-s-1-k/
Instruksjonsvideohttps://youtu.be/ASkTAl-e89k
Teknisk beskrivelsehttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-S-1-K-Technical-Data.pdf

Relatert

Hovedmaterialetetningsmasse
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriGulv - Tiles
IFC-klassifiseringVegg
CSI MasterFormat 2014 kode09 97 26
CSI MasterFormat 2014 tittelCementitious Coatings
OmniClass-nummer23-15 21 00
OmniClass-tittelSurface Applied Coatings
CSI UniFormat II kodeC3010
CSI UniFormat II tittelWall Finishes

Tilgjengelighet etter region

Nord Amerika	Europa
Anguilla	Danmark
Antigua og Barbuda	Frankrike
Aruba	Italia
Bahamas	Østerrike
Barbados	Polen
Belize	Russland
Bermuda	Sverige
Canada	Tsjekkia
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA