PANDOMO PS - Clear Waterborne Two-Part Urethane Protective Wear Layer
ARDEX

PANDOMO PS - Clear Waterborne Two-Part Urethane Protective Wear Layer

ARDEX PANDOMO® PS is a two-part urethane protective wear layer for interior use on ARDEX PANDOMO® Floor, FloorPlus and Loft. Designed to be used as a top coat over ARDEX PANDOMO® ES Clear Waterborne Epoxy Floor Primer, ARDEX PANDOMO PS dries quickly to allow the installation of a second coat in as little as 2 hours.

Key Features

  • Stain-resistant
  • UV-stable
  • Re-coat in as little as 2 hours
  • Full protection after 7-day cure
  • For interior use only
Spesifikasjon
  • Installation
    Coverage: 1000 – 1050 sq. ft. per kit; Coverage may vary based on surface texture.
    Drying Time (min. at 70˚F / 21˚C) Before applying second coat: approx. 2 hours
    Light foot traffic: approx. 24 hours after final coat is applied
    Full Cure (heavy traffic): 7 days
    Pot Life: 1 hour
    VOC: < 110 g/L
    Gloss Level: Approx. 28
    Packaging: Kit: 5 L (169 fl. oz.) bottle of Part A – Base; Two 500 mL (16.9 fl. oz.) bottles of Part B – Cross Linker
    Storage: Store in a cool, dry area. Do not leave container exposed to sun. Keep from heat. Protect from freezing. Keep container closed when not in use.
    Shelf Life: 6 months, unopened
    Warranty: ARDEX L.P.  Standard Limited Warranty applies.

Tekniske spesifikasjoner
  • Unik ref.Pandomo-PS
  • ProduktfamilieFinished Surfaces
  • ProduktgruppeClear Waterbourne Two-Part Urethane Sealer
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2019-08-26
  • Utgavenummer1
Relatert
  • Designet iUSA
  • Produsert iUSA
Klassifisering
  • BIMobject kategoriGulv - Coatings & Coverings
  • CSI MasterFormat 2014 kode03 53 00
  • CSI MasterFormat 2014 tittelConcrete Topping
  • OmniClass-nummer23-15 17 11 11
  • OmniClass-tittelFloor Toppings
  • CSI UniFormat II kodeC3020
  • CSI UniFormat II tittelFloor Finishes

Tilgjengelighet etter region

Nord Amerika Europa Asia
Anguilla
Østerrike
Singapore
Antigua og Barbuda
Russland
Thailand
Aruba
Storbritannia
Tyrkia
Bahamas
Tsjekkia
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit