DANODREN H25 PLUS
Danosa

DANODREN H25 PLUS

DANODREN H25 PLUS is a high density polyethylene (HDPE) brown nodular sheet bonded by thermofusion to a nonwoven calendered polypropylene geotextile. Its main use is for protection and vertical drainage. SCOPE: - Drainage and protection of the waterproofing of buried walls in building and civil works, such as false tunnels and underpasses. - Floors drainage and protection, when there is not hydrostatic pressure or the floor is over the phreatic level. - Drainage for walkable inverted roofs with continuous pavements. The drainage is placed between the thermal insulation and the pavement. ADVANTAGES AND BENEFITS: - Quick and easy installation. It provides a permanent drainage thanks to the chamber generated between the drainage sheet and the geotextile. - The geotextile fused to the nodules, absorbs and filters the water of the ground, avoiding the filling of the drainage system and facilitating the evacuation of the water towards the drains. - Due to the composition of the geotextile, polypropylene, DANODREN H PLUS can be left uncoated temporarily in the job site without deteriorating its mechanical and hydraulic properties. - Resistant to breakage, impact and deformation. - Resistant to chemical agent of the soil. Rot. - Provides great durability of the building and the structures against humidity and external factors. - Protection of the waterproofing against punching of soil.
Spesifikasjon
  • TECHNICAL DATA: - Longitudinal tensile strength: 19, -4 kN/m (UNE EN ISO 10319) - Transversal tensile strength: 17, -4 kN/m (UNE EN ISO 10319) - Longitudinal elongation: 75±15 % (UNE EN ISO 10319) - Transversal elongation: 75±15 % (UNE EN ISO 10319) - Static puncture resistance (CBR): 2.5, -0.5 kN (UNE EN ISO 12236) - Dynamic puncture resistance (cone): 10, +5 mm (UNE EN 13433) - Characteristic aperture measurement: 60 ± 5 µm (UNE EN ISO 12956) - Water permeability perpendicular to the plane: 0,12 -0,02 m/s (UNE EN ISO 11058) - Water flow capacity in the plane: 0.58552 l/m.s (UNE-EN ISO 12958) - Durability: more than 25 - Dangerous substances: NPD ADDITIONAL TECHNICAL DATA: - Compressive strength: 350 ±20% kN/m² (UNE EN ISO 604) - Water permeability perpendicular to the vertical plane: 0,12 -0,02 m/s (UNE EN ISO 11058) - Water permeability perpendicular to the horizontal plane: 0,002 -0,0002 m2/s (UNE-EN ISO 12958) - Air volume between nodules: 5.9 l/m² - Temperature range: -30 a 80 ºC - Nodules number: 1907 ENVIROMENTAL INFORMATION: - Pre-consumer recycled content: 20 % - Post-consumer recycled content: 80 % - Manufacturing Location: Fontanar, Guadalajara (España) - Volatile organic compounds (VOC): PND - Solar reflectance index (SRI): PND
Tekniske spesifikasjoner
  • Unik ref.danodren_h25_plus
  • ProduktfamilieDrainages
  • ProduktgruppePolyethylene
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2019-03-14
  • Utgavenummer1
  • Høyde (mm)2100
  • Bredde (mm)20000
Relatert
  • Hovedmaterialepolyetylen
  • Sekundært materialepolypropylen
  • Designet iSpania
  • Produsert iSpania
Klassifisering
  • BIMobject kategoriRørsystem - drenering
  • IFC-klassifiseringBygnings element fullmakt
  • Uniclass 2015 kodeSs_50_30_45_08
  • Uniclass 2015 beskrivelseBlanket drain land drainage systems
  • CSI MasterFormat 2014 kode33 46 33
  • CSI MasterFormat 2014 tittelRetaining Wall Drainage
  • OmniClass-nummer23-11 13 11 27
  • OmniClass-tittelGeotextile Subsurface Drainage Filtration
  • CSI UniFormat II kodeD2040
  • CSI UniFormat II tittelRain Water Drainage

Tilgjengelighet etter region

Europa Asia Nord Amerika Afrika Sør Amerika Oceania
Åland
Afghanistan
Anguilla
Algerie
Argentina
Amerikansk Samoa
Albania
Armenia
Antigua og Barbuda
Angola
Bolivia
Australia
Andorra
Aserbajdsjan
Aruba
Benin
Brasil
Cookøyene
Belgia
Bahrain
Bahamas
Botswana
Chile
Fiji
Bosnia-Hercegovina
Bangladesh
Barbados
Burkina Faso
Colombia
Fransk Polynesia
Bulgaria
Bhutan
Belize
Burundi
Ecuador
Guam
Danmark
Brunei
Bermuda
Den demokratiske republikken Kongo
Falklandsøyene (Malvinas)
Kiribati
Estland
Christmas Island
Canada
Den sentralafrikanske republikk
Fransk Guyana
Marshalløyene
Færøyene
De forente arabiske emirater
Cayman Islands
Djibouti
Guyana
Mikronesiaføderasjonen
Finland
Det britiske territoriet i Indiahavet
Costa Rica
Egypt
Paraguay
Nauru
Frankrike
Filippinene
Cuba
Ekvatorial-Guinea
Peru
New Zealand
Gibraltar
Georgia
Curaçao
Elfenbenskysten
Surinam
Niue
Guernsey
Hongkong
Den dominikanske republikk
Eritrea
Uruguay
Nord-Marianene
Hellas
India
Dominica
Eswatini
Venezuela
Norfolkøyene
Hviterussland
Indonesia
El Salvador
Etiopia
Ny-Caledonia
Irland
Irak
Grenada
Gabon
Øst-Timor
Island
Iran
Grønland
Gambia
Palau
Isle of Man
Israel
Guadeloupe
Ghana
Papua Ny-Guinea
Italia
Japan
Guatemala
Guinea
Pitcairn
Jersey
Jemen
Haiti
Guinea-Bissau
Salomonøyene
Kroatia
Jordan
Honduras
Kamerun
Samoa
Kypros
Kambodsja
Jamaica
Kapp Verde
Tokelau
Latvia
Kasakhstan
Jomfruøyene
Kenya
Tonga
Liechtenstein
Kina
Jomfruøyene
Komorene
Tuvalu
Litauen
Kirgisistan
Karibisk Nederland
Kongo
United States Minor Outlying Islands
Luxemburg
Kokosøyene
Martinique
Lesotho
Vanuatu
Malta
Kuwait
Mexico
Liberia
Wallis og Futuna
Moldova
Laos
Montserrat
Libya
Monaco
Libanon
Nicaragua
Madagaskar
Montenegro
Macao
Panama
Malawi
Nederland
Malaysia
Puerto Rico
Mali
Nord-Makedonia
Maldivene
Saint Kitts og Nevis
Marokko
Norge
Mongolia
Saint Lucia
Mauritania
Østerrike
Myanmar (Burma)
Saint Pierre og Miquelon
Mauritius
Polen
Nepal
Saint Vincent og Grenadinene
Mayotte
Portugal
Nord-Korea
Saint-Barthélemy
Mosambik
Romania
Oman
Saint-Martin
Namibia
Russland
Pakistan
Sint Maarten
Niger
San Marino
Palestina
Trinidad og Tobago
Nigeria
Serbia
Qatar
Turks- og Caicosøyene
Réunion
Slovakia
Saudi-Arabia
USA
Rwanda
Slovenia
Singapore
Sankt Helena
Spania
Sør-Korea
São Tomé og Príncipe
Storbritannia
Sri Lanka
Senegal
Svalbard og Jan Mayen
Syria
Seychellene
Sveits
Tadsjikistan
Sierra Leone
Sverige
Taiwan
Somalia
Tsjekkia
Thailand
Sør-Afrika
Tyskland
Turkmenistan
Sør-Sudan
Ukraina
Tyrkia
Sudan
Ungarn
Usbekistan
Tanzania
Vatikanstaten
Vietnam
Togo
Tsjad
Tunisia
Uganda
Vest-Sahara
Zambia
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit