2641 Sequential mechanical basin mixer
2641 Sequential mechanical basin mixer
    DELABIE
    Arkivert

    2641 Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Sequential mechanical mixer: opens and closes with cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed that the water flows through these tubes reduces the development of biofilm considerably. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals. Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Tekniske spesifikasjoner
    • Unik ref.2641
    • ProduktfamilieSanitary
    • ProduktgruppeBasin mixer
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2021-06-11
    • Utgavenummer1
    • Høyde (mm)175
    • Bredde (mm)215
    • Dybde (mm)282
    Relatert
    • Hovedmaterialemessing
    • Designet iFrankrike
    • Produsert iFrankrike
    • Nettovekt (kg)1959
    Klassifisering
    • BIMobject kategoriSanitær - Kraner / Armaturer / messingprodukter
    • IFC-klassifiseringSanitærterminal
    • ETIM-kodeEC011328
    • ETIM-navnWashbasin mixing tap
    • Uniclass 2015 kodePr_40_20
    • Uniclass 2015 beskrivelseSanitary fittings and accessories
    • CSI MasterFormat 2014 kode41 14 33
    • CSI MasterFormat 2014 tittelMixers
    • OmniClass-nummer23-31 11 00
    • OmniClass-tittelFaucets
    Common.Footer.ValueProp.Image.AltText

    Design App for Revit

    Last inn familier direkte i Revit-modellen din med ett klikk

    Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

    • Huk avArbeid direkte med BIM-objekter ved siden av Revit
    • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
    • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit