2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
2641S Sequential mechanical basin mixer
    DELABIE
    Arkivert

    2641S Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Mechanical sequential mixer: opens and closes on cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm classic ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed of the water reduces the development of biofilm. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset standard wall connectors M1/2" M3/4". Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for Healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Tekniske spesifikasjoner
    • Unik ref.2641S
    • ProduktfamilieSanitary
    • ProduktgruppeBasin mixer
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2021-05-31
    • Utgavenummer1
    • Høyde (mm)175
    • Bredde (mm)215
    • Dybde (mm)278
    Relatert
    • Hovedmaterialemessing
    • Designet iFrankrike
    • Produsert iFrankrike
    • Nettovekt (kg)1781
    Klassifisering
    • BIMobject kategoriSanitær - Kraner / Armaturer / messingprodukter
    • IFC-klassifiseringSanitærterminal
    • ETIM-kodeEC011328
    • ETIM-navnWashbasin mixing tap
    • Uniclass 2015 kodePr_40_20
    • Uniclass 2015 beskrivelseSanitary fittings and accessories
    • OmniClass-nummer23-31 11 00
    • OmniClass-tittelFaucets
    Common.Footer.ValueProp.Image.AltText

    Design App for Revit

    Last inn familier direkte i Revit-modellen din med ett klikk

    Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

    • Huk avArbeid direkte med BIM-objekter ved siden av Revit
    • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
    • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit