3S SERIES
| Unik ref.: | 3S-SERIES |
|---|---|
| Merke: | EBARA Pumps Europe |
| Produktfamilie: | Centrifugal pumps |
| Produktgruppe: | With rigid coupling |
| Dato for publisering: | 2019-07-09 |
| Versjon nummer / utgave nummer: | 1 |
| Skriv: | Objekt (enkelt objekt) |
Standardised centrifugal pumps with AISI 304 (EN 1.4301) stainless steel construction, with normalized motor and rigid coupling.
Suitable for:
• supplying water in residential commercial, agricultural and industrial systems
• pressure boosting
• fire-fighting
• heating and air-conditioning systems
• handling industrial liquids
• irrigation
• cooling towers
• swimming pools
• draining and washing systems
Suitable for:
• supplying water in residential commercial, agricultural and industrial systems
• pressure boosting
• fire-fighting
• heating and air-conditioning systems
• handling industrial liquids
• irrigation
• cooling towers
• swimming pools
• draining and washing systems
• Maximum working pressure: 10 bar
• Liquid temperature range (clear water):
- from -10°C to + 90°C for the standard version,
- from -20°C to + 120°C for the special versions
• MEI > 0,4
• Poles: 2 and 4
• Insulation class: F
• Protection degree: IP55
• Voltage:
- Three phase 3~230/400V ±10% (up to 4 kW included)
- Three phase 3~400/690V ±10% (from 5,5 kW and above)
• Pump body in AISI 304 (EN 1.4301) stainless steel
• Impeller in AISI 304 (EN 1.4301) stainless steel
• Shaft in AISI 304 (EN 1.4301) stainless steel
• Mechanical seal:
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM
HS = Silicon carbide/Silicon carbide/FPM
HW = Tungsten carbide/Tungsten carbide/FPM
HSW = Silicon carbide/Tungsten carbide/FPM
E = Graphite/Ceramic/EPDM
• Motor support in cast iron
• Impeller hydraulically balanced to prevent axial thrusts against the seal, it achieves 80% efficiency
• Back pull-out design: it allows removal of the motor, the coupling, the cantilever support and the impeller without compromising the housing of the pump body or removing the pipes
• IEC standard motor is used. This makes easier to find a replacement motor, in case of necessity
• Capacity: up to 138 m3/h
• Total Head: up to 65,5 m
• Liquid temperature range (clear water):
- from -10°C to + 90°C for the standard version,
- from -20°C to + 120°C for the special versions
• MEI > 0,4
• Poles: 2 and 4
• Insulation class: F
• Protection degree: IP55
• Voltage:
- Three phase 3~230/400V ±10% (up to 4 kW included)
- Three phase 3~400/690V ±10% (from 5,5 kW and above)
• Pump body in AISI 304 (EN 1.4301) stainless steel
• Impeller in AISI 304 (EN 1.4301) stainless steel
• Shaft in AISI 304 (EN 1.4301) stainless steel
• Mechanical seal:
Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM
HS = Silicon carbide/Silicon carbide/FPM
HW = Tungsten carbide/Tungsten carbide/FPM
HSW = Silicon carbide/Tungsten carbide/FPM
E = Graphite/Ceramic/EPDM
• Motor support in cast iron
• Impeller hydraulically balanced to prevent axial thrusts against the seal, it achieves 80% efficiency
• Back pull-out design: it allows removal of the motor, the coupling, the cantilever support and the impeller without compromising the housing of the pump body or removing the pipes
• IEC standard motor is used. This makes easier to find a replacement motor, in case of necessity
• Capacity: up to 138 m3/h
• Total Head: up to 65,5 m
| Produkt data url: | http://www.ebaraeurope.com/php/eng/prodotti_scheda/id_101_categoria_centri... |
|---|---|
| Installasjonsinstruksjoner: | http://www.ebaraeurope.com/php/eng/download/idm_2_idc_2_idl_8_category_.ht... |
| COBie Product Data Sheet: | |
| Produktsertifisering: | http://www.ebaraeurope.com/php/eng/download/idm_9_idc_69_idl_2_category_.h... |
| Teknisk beskrivelse: | http://www.ebaraeurope.com/php/eng/download/idm_3_idc_3_idl_2_category_.ht... |
| Instruksjon video: | |
| GTIN kode: |
QR-koden inneholder statisk URL nedenfor og vil bringe deg tilbake til denne siden hvis skannet av en enhet som iPhone eller smarttelefon
https://www.bimobject.com/no/ebara/product/3s-series
| Hoved materialet : | Stainless steel |
|---|---|
| Sekundært materiale: | |
| Designet i: | Italy |
| Produsert i: | Italy |
| BIMobject Kategori: | Rørsystem - Pumper |
|---|---|
| UNSPSC navn: | Pumps |
| UNSPSC kode: | 401515 |
| Uniclass 1.4 Kode: | JY20 |
| Uniclass 1.4 Beskrivelse: | Pumps |
| Uniclass 2.0 Kode: | PR-68 |
| Uniclass 2.0 Beskrivelse: | Pumps |
| Uniclass 2015 Kode: | Pr_65_53 |
| Uniclass 2015 Beskrivelse: | Pump products |
| NBS Reference Kode: | 68 |
| NBS Reference Beskrivelse: | Pumps |
| OmniClass-nummer: | 23-27 17 00 |
| OmniClass-tittel: | Pumps |
Dette produktet er tilgjengelig i:
Europe
- Åland Islands
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Guernsey
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Jersey
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Macedonia (FYROM)
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Svalbard and Jan Mayen
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Vatican City
BIMobject SEEK Properties
Plumbing - Pumps
| Navn | Verdi |
|---|---|
| Application | Centrifugal pump |
BIMobject®