4DS 4.5″ DOWNLIGHT – SQUARE
4DS 4.5″ DOWNLIGHT – SQUARE

    4DS 4.5″ DOWNLIGHT – SQUARE

    FEATURES

    • Beam angles ranging from 25º narrow to 60º wide for tailored performance
    • 4 inch aperture is unobtrusive in small scale spaces
    • Square shape accentuates architectural styles
    • New construction mounting pan, IC-rated, or pan-less remodel kit available
    • Open reflector with seven finishes complements any interior style
    • Die-cast trim choices include flush, regressed or angled lens
    • Contemporary design provides glare-free illumination for a soft ceiling appearance
    • IP65-rated die-cast trim includes easy-to-clean flush lens
    • Fully room-side accessible
    • Title 24 | JA8 compliant
    • Spring clip retention system eliminates trim sag
    • Easily adjust mounting arms below ceiling to adapt to a range of ceiling thicknesses
    • Low UGR meets LEED and WELL requirements
    • Support human-centric design with adaptive, individualized lighting using tunable white light
    • Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
    • Build America, Buy America and Buy American Act compliant
    • Wireless in-fixture control solutions available
    • Made Right Here® in the USA
      Spesifikasjon
      • Housing

        Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing- out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.

        Open Reflector

        Low-iridescent anodized aluminum with top diffuser.

        Lensed Trim

        Die-cast aluminum frame with micro-prismatic, acrylic lens.

        Electrical

        High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses.

        Mounting

        Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. Minimum 24″ O.C. marked spacing required for L40 lumen package.

        Listings

        • cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation.
        • Suitable for wet location under covered ceiling when specified with WET/CC option.
        • IP65 rated trim when specified with IP option.
        • IC-rated for direct contact with insulation when specified with I Mounting Type.
        • City of Chicago Environmental Air approved when specified with CP option.
        • Complies with ASTM-E283 when specified with ATH option.
        • RoHS compliant.
        • Title 24 (JA8) compliant in select configurations, see www.cacertappliances.energy.ca.gov.
        • Build America, Buy America (BABA) and Buy American Act (BAA) compliant.
        Request certification at hew.com/buy-american.

        Warranty

        5-year limited warranty, see details
      Tekniske spesifikasjoner
      • Unik ref.4ds-downlight-square
      • ProduktfamilieIndoor Luminaires
      • ProduktgruppeDownlights
      • TypeObjekt (enkelt objekt)
      • Utgivelsesdato2025-01-03
      • Utgavenummer1
      Relatert
      • HovedmaterialeMetall
      • Sekundært materialeGlass
      • Designet iUSA
      • Produsert iUSA
      Klassifisering
      • BIMobject kategoriBelysning - Takmontert
      • IFC-klassifiseringlysarmaturen
      • Uniclass 2015 kodeEF_70_80
      • Uniclass 2015 beskrivelseLighting
      • CSI MasterFormat 2014 kode26 51 13
      • CSI MasterFormat 2014 tittelInterior Lighting Fixtures, Lamps, And Ballasts
      • OmniClass-nummer23-35 47 11
      • OmniClass-tittelLighting Fixtures

      Tilgjengelighet etter region

      Nord Amerika
      Anguilla
      Antigua og Barbuda
      Aruba
      Bahamas
      Barbados
      Belize
      Bermuda
      Canada
      Cayman Islands
      Costa Rica
      Cuba
      Curaçao
      Den dominikanske republikk
      Dominica
      El Salvador
      Grenada
      Grønland
      Guadeloupe
      Guatemala
      Haiti
      Honduras
      Jamaica
      Jomfruøyene
      Jomfruøyene
      Karibisk Nederland
      Martinique
      Mexico
      Montserrat
      Nicaragua
      Panama
      Puerto Rico
      Saint Kitts og Nevis
      Saint Lucia
      Saint Pierre og Miquelon
      Saint Vincent og Grenadinene
      Saint-Barthélemy
      Saint-Martin
      Sint Maarten
      Trinidad og Tobago
      Turks- og Caicosøyene
      USA
      Common.Footer.ValueProp.Image.AltText

      Design App for Revit

      Last inn familier direkte i Revit-modellen din med ett klikk

      Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

      • Huk avArbeid direkte med BIM-objekter ved siden av Revit
      • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
      • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit