IMMERGASFølg

Wall-hung boiler VICTRIX PRO 35 V2 EU

Spesifikasjon

Spesifikasjon

• Wall-hung, room-sealed, fan-assisted premix condensing modules, featuring high efficiency and forced circulation with variable heat outputs. The generators are certified for installation both in plant rooms and outdoors (with specific protection for unsheltered installations), and can be used in either room-sealed fan-assisted or open-flue fan-assisted configurations. The module consists of: • a total premix combustion system with a cylindrical multigas steel burner, complete with ignition electrodes and an ionization control electrode; • a primary gas/water heat exchanger with a composite casing, including an air vent valve and an internal stainless steel coil; • a stainless steel combustion chamber internally insulated with ceramic panels; • an electronically variable-speed flue gas exhaust fan and a flue gas probe; • a condensate disposal circuit including a siphon and a flexible drain pipe; • a hydraulic group consisting of a flow manifold, a primary circuit pressure transducer, and a low-consumption modulating circulation pump; • a 4-bar system safety valve and a standard discharge funnel; • an overtemperature water safety thermostat; • an electronic board with continuous flame modulation, 1:10 modulation range; • a system flow and return regulation probe, heating flow temperature from 20 to 85 °C; • an IPX5D electrical protection rating, with the possibility of outdoor installation under an additional cover (unsheltered); • standard anti-freeze protection down to -5 °C (-15 °C with a specific optional kit); • pre-arrangement for cascade operation (up to 5 generators with a single safety kit); • possibility of installation using a free-standing support frame kit, suitable for installing one or more VICTRIX PRO V2 units; • possibility of installing the generator inside a cabinet suitable for unsheltered outdoor installation; • possibility of connecting to a remote system management system (optional), when paired with the cascade and zone controller; • compatible with the Ø 80 mm flexible chimney lining system (single installation).

Tekniske spesifikasjoner

Tekniske spesifikasjoner

• Unik ref.VICTRIXPRO35V2EU
• TypeObjekt (enkelt objekt)
• Utgivelsesdato2026-06-30
• Utgavenummer1
• Høyde (mm)851
• Bredde (mm)440
• Dybde (mm)499

Lenker

Lenker

• Produktets nettadressehttps://www.immergas.com/en/product/3.034431/VICTRIX_PRO_35_V2_EU/
• Monteringsanvisninghttps://www.immergas.com/media/Prodotto/65fbf35c0aef1fc75fc5b7b5/LI%20Victrix-Pro-35-55-60-68-80%20V2.pdf?ef=_ENG.pdf
• Produktsertifiseringhttps://www.immergas.com/media/Prodotto/65fbf35c0aef1fc75fc5b7b5/certificato%20VICTRIX%20PRO%20V2%20EU.pdf
• Teknisk beskrivelsehttps://www.immergas.com/media/Prodotto/65fbf35c0aef1fc75fc5b7b5/ST%20VICTRIX%20PRO%20V2%20EU.pdf

Relatert

Relatert

• Designet iItalia
• Produsert iItalia
• Nettovekt (kg)50

Klassifisering

Klassifisering

• BIMobject kategoriVVS - Varmtvannsberedere
• IFC-klassifiseringBereder
• OmniClass-nummer23-33 11 00
• OmniClass-tittelCommercial Boilers