Is Box
IVAR

Is Box

IS-BOX is a box with a pair of pre-installed 3+1 and 4+1 outlet sanitary manifolds, suitable for wall recessing even in bathrooms covered with tiles or valuable materials. The reduced size allows it to be installed in brick or plasterboard walls with a minimum thickness of 60 mm. The manifolds are compatible with drinking water and the inlets can be shut off by screw sealing valves and replaceable headworks. Available in two colours (white and chrome), also in the completely inspectable version.
Spesifikasjon
  • IS-BOX is a box with pre-assembled sanitary manifolds, suitable for recessed installation. The manifolds for hot and cold water have 3 and 4 outlets respectively. The IS-BOX manifold fi ttings are 3/4’’ EK, with a spacing of 40 mm. Where appropriate, for each additional manifold, an additional outlet can be created by removing the caps from the fi tting on the right: in this case, the thread released is 1/2’’ F. The misalignment between the manifold gaps is 16.5 mm. The inlets to the two manifolds accept adduction tubes with a maximum diameter of 20 mm. KIT INCLUSIVE OF: - Domestic hot water manifold - Domestic cold water manifold - Screw-controlled interception valve - Threaded cap - Flush box 58 - 73 mm - Interception valve plastering protection - Plastering protection (serves as a cover in models that cannot be inspected) - Key for manual interception valve activation in the absence of knobs - Interception valve cover plate (perforated in models with knobs) - Visible cover for models that can be fully inspected - Chrome-plated knobs for interception valves - Disks and fastening screws CONDITIONS OF USE Maximum static operating pressure: 10 bar. Fluid in contact: drinking water. Maximum fl uid temperature: 100 °C. MATERIALS Manifold body: brass CW617N. Sealing elements: Peroxide EPDM. Screw-controlled interception valve stem, body and rod: brass CW617N. Key: PA + 30% FV. Protective box and cover: 40% talc-filled PP. Plate: ABS, white or chrome-plated. Front cover (for versions that can be inspected only): ABS, white or chrome-plated. INSTALLATION Prepare a cavity in the wall with the following dimensions: height H ≥ 182 mm, width W ≥ 268 mm; depth D ≥ 58 mm. MODELS AVAILABLE 1) IS-BOX 1 • Interception valves that can be inspected and activated using a special key; • Code 506592: RAL 9010 ; code 506592CR: chrome-plated 2) IS-BOX 2 • Box that can be fully inspected; • Interception valves that can be activated using a special key; • Code 506593: RAL 9010 ; code 506593CR: chrome-plated 3) IS-BOX 3 • Interception valves that can be inspected and activated using knobs; • Code 506594: RAL 9010 ; code 506594CR: chrome-plated 4) IS-BOX 4 • Box that can be fully inspected; • Interception valves that can be activated using knobs; • Code 506595: RAL 9010 ; code 506595CR: chrome-plated
Tekniske spesifikasjoner
  • Unik ref.IS-BOX
  • ProduktfamilieSanitary System
  • ProduktgruppeIS·BOX
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2018-07-02
  • Utgavenummer1
Relatert
  • Hovedmaterialemessing
  • Sekundært materialeStål
  • Designet iItalia
  • Produsert iItalia
Klassifisering
  • BIMobject kategoriRørsystem - VVS / rørleggerarbeid
  • IFC-klassifiseringfordelingsflyt element
  • ETIM-kodeEG000002
  • ETIM-navnInstallation pipes/cable protection tubes
  • UNSPSC-navnPlumbing fixtures
  • UNSPSC-kode3018
  • Uniclass 2015 kodeSs_55_70
  • Uniclass 2015 beskrivelseWater distribution and supply systems
  • CSI MasterFormat 2014 kode35 20 13.19
  • CSI MasterFormat 2014 tittelHydraulic Manifolds
  • OmniClass-nummer23-39 21 13 21
  • OmniClass-tittelManifolds
  • CSI UniFormat II kodeD20
  • CSI UniFormat II tittelPLUMBING

Tilgjengelighet etter region

Europa Asia Nord Amerika Afrika Sør Amerika Oceania
Åland
Afghanistan
Anguilla
Algerie
Argentina
Amerikansk Samoa
Albania
Armenia
Antigua og Barbuda
Angola
Bolivia
Australia
Andorra
Aserbajdsjan
Aruba
Benin
Brasil
Cookøyene
Belgia
Bahrain
Bahamas
Botswana
Chile
Fiji
Bosnia-Hercegovina
Bangladesh
Barbados
Burkina Faso
Colombia
Fransk Polynesia
Bulgaria
Bhutan
Belize
Burundi
Ecuador
Guam
Danmark
Brunei
Bermuda
Den demokratiske republikken Kongo
Falklandsøyene (Malvinas)
Kiribati
Estland
Christmas Island
Canada
Den sentralafrikanske republikk
Fransk Guyana
Marshalløyene
Færøyene
De forente arabiske emirater
Cayman Islands
Djibouti
Guyana
Mikronesiaføderasjonen
Finland
Det britiske territoriet i Indiahavet
Costa Rica
Egypt
Paraguay
Nauru
Frankrike
Filippinene
Cuba
Ekvatorial-Guinea
Peru
New Zealand
Gibraltar
Georgia
Curaçao
Elfenbenskysten
Surinam
Niue
Guernsey
Hongkong
Den dominikanske republikk
Eritrea
Uruguay
Nord-Marianene
Hellas
India
Dominica
Eswatini
Venezuela
Norfolkøyene
Hviterussland
Indonesia
El Salvador
Etiopia
Ny-Caledonia
Irland
Irak
Grenada
Gabon
Øst-Timor
Island
Iran
Grønland
Gambia
Palau
Isle of Man
Israel
Guadeloupe
Ghana
Papua Ny-Guinea
Italia
Japan
Guatemala
Guinea
Pitcairn
Jersey
Jemen
Haiti
Guinea-Bissau
Salomonøyene
Kroatia
Jordan
Honduras
Kamerun
Samoa
Kypros
Kambodsja
Jamaica
Kapp Verde
Tokelau
Latvia
Kasakhstan
Jomfruøyene
Kenya
Tonga
Liechtenstein
Kina
Jomfruøyene
Komorene
Tuvalu
Litauen
Kirgisistan
Karibisk Nederland
Kongo
United States Minor Outlying Islands
Luxemburg
Kokosøyene
Martinique
Lesotho
Vanuatu
Malta
Kuwait
Mexico
Liberia
Wallis og Futuna
Moldova
Laos
Montserrat
Libya
Monaco
Libanon
Nicaragua
Madagaskar
Montenegro
Macao
Panama
Malawi
Nederland
Malaysia
Puerto Rico
Mali
Nord-Makedonia
Maldivene
Saint Kitts og Nevis
Marokko
Norge
Mongolia
Saint Lucia
Mauritania
Østerrike
Myanmar (Burma)
Saint Pierre og Miquelon
Mauritius
Polen
Nepal
Saint Vincent og Grenadinene
Mayotte
Portugal
Nord-Korea
Saint-Barthélemy
Mosambik
Romania
Oman
Saint-Martin
Namibia
Russland
Pakistan
Sint Maarten
Niger
San Marino
Palestina
Trinidad og Tobago
Nigeria
Serbia
Qatar
Turks- og Caicosøyene
Réunion
Slovakia
Saudi-Arabia
USA
Rwanda
Slovenia
Singapore
Sankt Helena
Spania
Sør-Korea
São Tomé og Príncipe
Storbritannia
Sri Lanka
Senegal
Svalbard og Jan Mayen
Syria
Seychellene
Sveits
Tadsjikistan
Sierra Leone
Sverige
Taiwan
Somalia
Tsjekkia
Thailand
Sør-Afrika
Tyskland
Turkmenistan
Sør-Sudan
Ukraina
Tyrkia
Sudan
Ungarn
Usbekistan
Tanzania
Vatikanstaten
Vietnam
Togo
Tsjad
Tunisia
Uganda
Vest-Sahara
Zambia
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit