JM Corbond IV® Closed-Cell Spray Foam

JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

Spesifikasjon

PART 2 - PRODUCTS
CLOSED-CELL SPRAY POLYURETHANE FOAM
1. Closed-Cell Spray Polyurethane Foam: ASTM C 1029, Type II, minimum density of 1.8 lb/cu. ft. and minimum aged R-value at 1-inch thickness of 6.8 deg F x h x sq. ft./Btu at 75 deg F.
1. 1. Surface-Burning Characteristics: Comply with ASTM E 84; testing by a qualified testing agency. Identify products with appropriate markings of applicable testing agency.
1. a. Flame-Spread Index: 25 or less.
2. b. Smoke-Developed Index: 450 or less.
Fire Propagation Characteristics: Passes NFPA 285 testing as part of an approved assembly.
Manufacturers: Subject to compliance with requirements, provide products by one of the following:
1. a. Johns Manville, “Corbond IV”; www.jm.com

Tekniske spesifikasjoner

Unik ref.jm-corbond-iv-closed-cell-spray-foam
ProduktfamilieBuilding Insulation
ProduktgruppeSpray Foam Insulation
TypeObjekt (enkelt objekt)
Utgivelsesdato2026-07-15
Utgavenummer1

Lenker

COBie produktdatabladhttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Data%20Sheets/Resi%20and%20Commercial/JM_BI_Corbond_IV_DS.pdf
Produktets nettadressehttps://www.jm.com/en/insulation-systems/building-insulation/jm-iv-hfo/
Monteringsanvisninghttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/JM_BI_SPF_Corbond_IV_Installation%20Guide_BID-391.pdf
Produktsertifiseringhttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/Corbond%20IV%20GREENGUARD%20Gold%20Certification%20205402-420.pdf
Teknisk beskrivelsehttps://www.jm.com/content/dam/jm/global/en/building-insulation/Files/BI%20Toolbox/ER_0146.pdf

Relatert

Hovedmaterialepolyuretan
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriByggematerialer - isolasjon
CSI MasterFormat 2014 kode07 21 19
CSI MasterFormat 2014 tittelFoamed-In-Place Insulation
OmniClass-nummer23-13 25 19
OmniClass-tittelThermal Insulation

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA