Publiser produktene dine

Prado Red Pressed Facing Brick

Prado Red Pressed Facing Brick

Cerámica Malpesa

Arkivert

Prado Red Pressed Facing Brick

The pressing process involves crushing the clay between two facing presses, which force it into a mold in the shape of the final unit. The press surfaces are in relief to produce raised and sunken areas in the units. The outer shape of the unit produced therefore depends on the mold cavity. Facing bricks manufactured by pressing a mixture of clays and water. After drying off the water added for the extrusion, the bricks are fired in an oxidizing atmosphere in a Tunnel Kiln. Each model is burned at its own optimal firing temperature (always >1000º C). Due to the carbonate content in the clay, the suction (initial rate of water absorption) of these products is greater than 0.10 gr/cm2 minute. To avoid having to wet the bricks before they are laid (a necessary, although not always applied, measure with suction of over 0.10 gr/cm2 minute), they are there forewaterproofed by immersion or soaking with a silicon compound after leaving the kiln and before being packed. This treatment improves their layability, facilitates cleaning and keeps wall attractive and free from contamination over a long period of time.

Spesifikasjon

Available sizes (mm): 240X120X50

Tekniske spesifikasjoner

Unik ref.Ladrillo-Caravista-Prensado-Rojo-Prado
ProduktfamilieLadrillo Caravista / Facing Brick
ProduktgruppePressed Facing Brick/Ladrillo Prensado
TypeObjekt (enkelt objekt)
Utgivelsesdato2019-08-01
Utgavenummer1
Høyde (mm)50
Bredde (mm)240
Dybde (mm)120

Lenker

Produktets nettadressehttp://www.malpesa.es/en/detalle_final_producto.php?idc=2&ids=6&id=106
Monteringsanvisninghttp://www.malpesa.es/pdf/publicaciones/M_Recom0903.pdf
Instruksjonsvideohttp://www.malpesa.es/video.html
Produktsertifiseringhttp://www.malpesa.es/pdf/CERTIFICADO_ER_13-11-2015.pdf
Teknisk beskrivelsehttps://www.malpesa.es/pdf/ladrillo/106--ficha.pdf

Relatert

Hovedmaterialekeramikk
Sekundært materialemurverk
Designet iSpania
Produsert iSpania
Nettovekt (kg)2.5

Klassifisering

BIMobject kategoriByggematerialer - Murverk
IFC-klassifiseringVegg
UNSPSC-navnCeramic bricks
UNSPSC-kode30131602
Uniclass 2015 kodePr_20_93_52_15
Uniclass 2015 beskrivelseClay bricks
CSI MasterFormat 2014 kode04 21 13
CSI MasterFormat 2014 tittelBrick Masonry
OmniClass-nummer23-13 21 19 13
OmniClass-tittelFace Bricks
CSI UniFormat II kodeB2010
CSI UniFormat II tittelExterior Walls

Lignende produkter

bilde for Face Brick Baco Black Brick

Cerámicas Mora Face Brick Baco Black Brick

bilde for Architectural Masonry Units - Gemstone®

York Building Products Architectural Masonry Units - Gemstone®

bilde for Termoarcilla® Thermal Insulating Clay Block, 24 cm

Grupo Diáz Redondo Termoarcilla® Thermal Insulating Clay Block, 24 cm

bilde for Face Brick White Glazed Brick

Cerámicas Mora Face Brick White Glazed Brick

bilde for Face Brick Red Brick

Cerámicas Mora Face Brick Red Brick

bilde for ICMU Insultech Oldcastle OEBE Strecher Unit

Echelon ICMU Insultech Oldcastle OEBE Strecher Unit

Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

Arbeid direkte med BIM-objekter ved siden av Revit
2 GB skylagring – lagre Revit-innholdet ditt
Få LCA for innebygd karbon (A1–A3) direkte fra Revit