Draken Planter guard

Product numbers and combinations

Ö03-33/3 Draken Planter Guard with 3 arches, 81 cm.

Ö03-33/6 Draken Planter Guard with 6 arches, 162 cm.

Append to product number

Metal surface finish

Vert 2300 Sablé (Green)
Pig 2900 Sablé (Grey)
RAL 6009 (Dark green)
C for any color other than standard, starting cost is added.

Installation type

M for in-ground.

Materials and surface treatments

Steel

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated.

Hot-dip galvanized

Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Assembly and placementIn-ground

Cast in ground.

Delivered assembled.

MaintenancePowdercoated steel

Products that are powder-coated can be touch-up painted with alkyd paint.

Read more in our general maintenance advice at nola.se/en/care-and-maintenance

Versions

In the same product series there is also Drake bicycle stand.