LASER+ 10 EXTREME A/M RM

LASER+ 10 EXTREME A/M RM

High-powered LED floodlight for indoor and outdoor.
Spesifikasjon
  • - Die-cast aluminium bearing structure polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5) - UV and heat stabilised, technopolymer diffuser with integral custom moulded optics - High-transparency polycarbonate optics - Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity - Ultra-high efficiency anodised extruded aluminium heat sink - The superior heat dissipation provided by the extruded aluminium heat sink allows a maximum luminaire operating temperature of 50°C, without dimming down the system - Technopolymer electrical connection box - Cable gland M20x1.5 for cables Ø 10- Ø 14 mm - Light beam obtained by the combination of multiple LED modules - Stainless steel locking hardware - Galvanised powder-coated steel bracket - All LASER+ power consumption includes power unit losses - Integral graduated goniometer for aiming purposes - For LASER+ 20/30 models use only the power supply units available as accessories (ordered separately) - IP66-rated watertight power supply units with DALI or DMX-RDM dimming, with one channel (1CH - for one projector), two channels (1 + 1CH - for two projectors) and three channels (1 + 1 + 1CH - for three projectors) are available as an accessory. Maximum distance of 100 m cable length between the units and the luminaire (50 m for 1CH units) - For the electrical connection between the two and three-channel power supply units and the projectors, use the watertight junction box available as an accessory - Power supply units can be addressed separately for independent lighting management of each projector. Therefore, for the two and three-channel units, two and three dimming addresses will be needed respectively - The power supply groups are made up of drivers with protection against mains power surges of up to 10 kV (CM/DM) - Other colour temperatures (CCT) and colour rendering index (CRI) options available. Consult factory - For up lighting installation, consult factory - Design by GIORGIO LODI
Tekniske spesifikasjoner
  • Unik ref.laser-plus-10-extreme-am-rm
  • ProduktfamilieProfessional
  • ProduktgruppeProfessional floodlight
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2024-06-14
  • Utgavenummer1
  • Høyde (mm)229
  • Bredde (mm)780
  • Dybde (mm)315
Relatert
  • HovedmaterialeAluminium
  • Sekundært materialePlastikk
  • Designet iItalia
  • Produsert iItalia
Klassifisering
  • BIMobject kategoriBelysning - belysning
  • IFC-klassifiseringlysarmaturen
  • ETIM-kodeEC001744
  • ETIM-navnDownlight/spot/floodlight
  • Uniclass 2015 kodeEF_70_80
  • Uniclass 2015 beskrivelseLighting
  • CSI MasterFormat 2014 kode26 56 68
  • CSI MasterFormat 2014 tittelExterior Athletic Lighting
  • OmniClass-nummer23-35 47 11 21 19
  • OmniClass-tittelFloodlight Fixtures

Tilgjengelighet etter region

Europa Asia Afrika Oceania
Åland
Afghanistan
Algerie
Amerikansk Samoa
Albania
Armenia
Angola
Australia
Andorra
Aserbajdsjan
Benin
Cookøyene
Belgia
Bahrain
Botswana
Fiji
Bosnia-Hercegovina
Bangladesh
Burkina Faso
Fransk Polynesia
Bulgaria
Bhutan
Burundi
Guam
Danmark
Brunei
Den demokratiske republikken Kongo
Kiribati
Estland
Christmas Island
Den sentralafrikanske republikk
Marshalløyene
Færøyene
De forente arabiske emirater
Djibouti
Mikronesiaføderasjonen
Finland
Det britiske territoriet i Indiahavet
Egypt
Nauru
Frankrike
Filippinene
Ekvatorial-Guinea
New Zealand
Gibraltar
Georgia
Elfenbenskysten
Niue
Guernsey
Hongkong
Eritrea
Nord-Marianene
Hellas
India
Eswatini
Norfolkøyene
Hviterussland
Indonesia
Etiopia
Ny-Caledonia
Irland
Irak
Gabon
Øst-Timor
Island
Iran
Gambia
Palau
Isle of Man
Israel
Ghana
Papua Ny-Guinea
Italia
Japan
Guinea
Pitcairn
Jersey
Jemen
Guinea-Bissau
Salomonøyene
Kroatia
Jordan
Kamerun
Samoa
Kypros
Kambodsja
Kapp Verde
Tokelau
Latvia
Kasakhstan
Kenya
Tonga
Liechtenstein
Kina
Komorene
Tuvalu
Litauen
Kirgisistan
Kongo
United States Minor Outlying Islands
Luxemburg
Kokosøyene
Lesotho
Vanuatu
Malta
Kuwait
Liberia
Wallis og Futuna
Moldova
Laos
Libya
Monaco
Libanon
Madagaskar
Montenegro
Macao
Malawi
Nederland
Malaysia
Mali
Nord-Makedonia
Maldivene
Marokko
Norge
Mongolia
Mauritania
Østerrike
Myanmar (Burma)
Mauritius
Polen
Nepal
Mayotte
Portugal
Nord-Korea
Mosambik
Romania
Oman
Namibia
Russland
Pakistan
Niger
San Marino
Palestina
Nigeria
Serbia
Qatar
Réunion
Slovakia
Saudi-Arabia
Rwanda
Slovenia
Singapore
Sankt Helena
Spania
Sør-Korea
São Tomé og Príncipe
Storbritannia
Sri Lanka
Senegal
Svalbard og Jan Mayen
Syria
Seychellene
Sveits
Tadsjikistan
Sierra Leone
Sverige
Taiwan
Somalia
Tsjekkia
Thailand
Sør-Afrika
Tyskland
Turkmenistan
Sør-Sudan
Ukraina
Tyrkia
Sudan
Ungarn
Usbekistan
Tanzania
Vatikanstaten
Vietnam
Togo
Tsjad
Tunisia
Uganda
Vest-Sahara
Zambia
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit