DOMO SENSIA Toilet Built-In Fluxor Electronic without mechanical button

DOMO SENSIA Toilet Built-In Fluxor Electronic without mechanical button

Electronic flush with a system of patented detection by means of active infrared rays for WC Presto Domo Sensia. Models: 79710 - 79711.
Spesifikasjon
  • *Factory programmed. *Water and energy savings. *Components integrated into the tap for easy installation and increased vandal protection. *Integrated stopcock. *Watertight CR-P2 6V battery pack or 12 V transformer depending on the model. *Automatic closing of the solenoid valve in the event of a power failure. *Low battery indication via communication LED. *Constant discharge volume with pressures from 1.2 to 4 bar. *Built-in anti-siphon device in accordance with current health regulations. *Automatic rinsing every 24 hours. *Brass exterior plate. *Recommended operating pressure: 1-5 bar. *G1 male inlet. *Sensor operation. *Closing by presence. *Admissible water temperature: the materials that make up the tap parts can withstand a maximum temperature of 70ºC. *Supplied with: decorative plate without safety button, CR-P2 6V battery or 12 V transformer depending on model and fluxor.
Tekniske spesifikasjoner
  • Unik ref.79710
  • ProduktfamilieElectronic Faucets
  • ProduktgruppeWC
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2025-01-27
  • Utgavenummer1
  • Høyde (mm)200
  • Bredde (mm)180
  • Dybde (mm)71
Relatert
  • Hovedmaterialekrom
  • Designet iSpania
  • Nettovekt (kg)1.3
Klassifisering
  • BIMobject kategoriSanitær - Kraner / Armaturer / messingprodukter
  • IFC-klassifiseringSanitærterminal
  • CSI MasterFormat 2014 kode22 41 00
  • CSI MasterFormat 2014 tittelResidential Plumbing Fixtures

Tilgjengelighet etter region

Sør Amerika Nord Amerika Europa
Argentina
Costa Rica
Portugal
Bolivia
El Salvador
Spania
Brasil
Guatemala
Chile
Honduras
Colombia
Mexico
Ecuador
Nicaragua
Falklandsøyene (Malvinas)
Panama
Fransk Guyana
Trinidad og Tobago
Guyana
Paraguay
Peru
Surinam
Uruguay
Venezuela
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit