Façade Facid 65Façade Facid 65Façade Facid 65Façade Facid 65Façade Facid 65Façade Facid 65
Vis tidligere bilder
Vis neste bilder
Schüco

Façade Facid 65

Multifunctional textile facade with a basic depth of 65 mm

Be it for a suspended, rear-ventilated façade, integrated, active screening and solar shading, an additional decorative level or a combined façade, the FACID 65 textile façade offers a wide range of design options by means of digital printing and three-dimensional malleability.

  • Various translucent and transparent textiles enables a wide variety of lighting scenarios
  • Changing the textile façade: In the event that design or communication requirements change, the fabric can be replaced easily and quickly while the building is still in use without changing the profile technology 
  • based on a patented clamping system that has been tried-and-tested for years worldwide: Maximum functionality and lifecycle 
  • allows optimum, simple works planning through innovative components: Efficient thanks to prefabrication and quick installation without expensive special tools or machinery


Spesifikasjon
  • System description of FACID 65 as a suspended, rear-ventilated façade

    The system is a fabric façade, whereby the fabric is clamped all the way around with aluminium profiles.

    The system essentially consists of extruded aluminium basic profiles in which a façade fabric approved by Schüco International KG is inserted and fixed with patented aluminium flexholders. Where PTFE-coated fibreglass fabric is used, a patented, coated aluminium flexholder is inserted. The clamping channels in the basic profiles are closed off using cover profiles. The basic profiles are fixed to a substructure which, in turn, is mounted on the building outer wall. The substructures must be produced from aluminium, stainless steel or galvanised steel, for example, depending on the project-specific, on-site statics. The basic depth of the substructure varies and will depend on the required thickness of the thermal insulation.

    The drainage level forms a breathable, watertight and UV-stable membrane which is fully mounted on the thermal insulation and the substructure. Please refer to the relevant manufacturers for specifications on mounting the substructure, the thermal insulation and the watertight membrane.

    The profiles can be installed on the façade horizontally, vertically and diagonally. Ensure that the aluminium profiles can expand sufficiently here. The system can be loaded with a maximum grammage of 400 g/m². As a basic principle, only fabric that has been tested by Schüco International KG and approved for the system may be used.

    Fabric manufacture

    The fabric used for the system can be prepared either in the workshop or on the building site. To ensure that the fabric façade has a uniform appearance, the fabric on one side of the façade must come from one production batch of the fabric manufacturer. Furthermore, when installing the fabric façade, ensure that the fabric is always mounted in the same direction, i.e. the roll direction or warp direction of the fabric must always have the same alignment.

    Installing the FACID basic profiles

    The FACID basic profiles must be fixed to the substructure in accordance with the requirements of the defining statics. Sliding and fixed bearing points must be considered in accordance with the statics. The contractor must also plan the expansion gaps that are standard in façade technology, in order to account for thermal expansion of the profiles. To maintain the transition between the individual aluminium profiles in the area of the fabric, stainless steel connecting pins must be used. The profile attachments must be designed with a maximum spacing of 10 mm between the fabric leading edges of the FACID profiles.

    Installing the cover profiles

    All cover profiles must be secured with self-tapping V2A stainless steel screws in the basic profiles with a distance between screws of max. 1500 mm. The screw heads must be painted in the colour of the cover profiles.

    Assessment of the fabric tensioning

    Once the fabric has been clamped on all sides, the fabric surface must be free of folds.

Tekniske spesifikasjoner
  • Unik ref.schueco_facid_65
  • ProduktfamilieCurtain Wall
  • ProduktgruppeAdd-on Construction
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2020-04-01
  • Utgavenummer3
  • Dybde (mm)65
Lenker
Relatert
  • HovedmaterialeAluminium
  • Sekundært materialePVC belagt polyester
  • Designet iTyskland
  • Produsert iTyskland
Klassifisering
  • BIMobject kategoriVegger - ringmur
  • IFC-klassifiseringringmuren
  • UNSPSC-navnWindow screens
  • UNSPSC-kode30171614
  • Uniclass 2015 kodeSs_25_10_20
  • Uniclass 2015 beskrivelseCurtain walling systems

Tilgjengelighet etter region

Europa Nord Amerika Asia Afrika Oceania Sør Amerika
Albania
Anguilla
Afghanistan
Egypt
Amerikansk Samoa
Argentina
Andorra
Antigua og Barbuda
Bahrain
Algerie
Australia
Bolivia
Østerrike
Aruba
Iran
Angola
Cookøyene
Brasil
Hviterussland
Barbados
Irak
Benin
Mikronesiaføderasjonen
Chile
Belgia
Belize
Israel
Botswana
Fiji
Colombia
Bosnia-Hercegovina
Bermuda
Jordan
Burkina Faso
Fransk Polynesia
Ecuador
Bulgaria
Jomfruøyene
Kuwait
Burundi
Guam
Falklandsøyene (Malvinas)
Kroatia
Canada
Libanon
Kamerun
Kiribati
Fransk Guyana
Kypros
Karibisk Nederland
Oman
Kapp Verde
Marshalløyene
Guyana
Tsjekkia
Cayman Islands
Palestina
Den sentralafrikanske republikk
Nauru
Paraguay
Danmark
Saint-Martin
Qatar
Tsjad
Ny-Caledonia
Peru
Estland
Costa Rica
Saudi-Arabia
Komorene
New Zealand
Surinam
Færøyene
Cuba
Syria
Elfenbenskysten
Niue
Uruguay
Finland
Curaçao
Tyrkia
Den demokratiske republikken Kongo
Norfolkøyene
Venezuela
Frankrike
Dominica
De forente arabiske emirater
Djibouti
Nord-Marianene
Tyskland
Den dominikanske republikk
Jemen
Ekvatorial-Guinea
Palau
Gibraltar
El Salvador
Armenia
Eritrea
Papua Ny-Guinea
Hellas
Grønland
Aserbajdsjan
Etiopia
Pitcairn
Guernsey
Grenada
Bangladesh
Gabon
Samoa
Ungarn
Guadeloupe
Bhutan
Ghana
Salomonøyene
Island
Guatemala
Det britiske territoriet i Indiahavet
Guinea
Øst-Timor
Irland
Haiti
Brunei
Guinea-Bissau
Tokelau
Isle of Man
Honduras
Kambodsja
Kenya
Tonga
Italia
Jamaica
Kina
Lesotho
Tuvalu
Jersey
Martinique
Christmas Island
Liberia
United States Minor Outlying Islands
Latvia
Mexico
Kokosøyene
Libya
Wallis og Futuna
Liechtenstein
Montserrat
Georgia
Madagaskar
Vanuatu
Litauen
Nicaragua
Hongkong
Malawi
Luxemburg
Panama
India
Mali
Makedonia (FYROM)
Puerto Rico
Indonesia
Mauritania
Malta
Saint Kitts og Nevis
Japan
Mauritius
Moldova
Saint Lucia
Kasakhstan
Mayotte
Monaco
Saint Pierre og Miquelon
Kirgisistan
Marokko
Montenegro
Saint Vincent og Grenadinene
Laos
Mosambik
Nederland
Saint-Barthélemy
Macao
Namibia
Norge
Sint Maarten
Malaysia
Niger
Polen
Bahamas
Maldivene
Nigeria
Portugal
Trinidad og Tobago
Mongolia
Kongo
Romania
Turks- og Caicosøyene
Myanmar (Burma)
Réunion
Russland
Jomfruøyene
Nepal
Rwanda
San Marino
USA
Nord-Korea
Sankt Helena
Serbia
Pakistan
São Tomé og Príncipe
Slovakia
Filippinene
Senegal
Slovenia
Singapore
Seychellene
Spania
Sør-Korea
Sierra Leone
Svalbard og Jan Mayen
Sri Lanka
Somalia
Sverige
Taiwan
Sør-Afrika
Sveits
Tadsjikistan
Sør-Sudan
Ukraina
Thailand
Sudan
Storbritannia
Turkmenistan
Swaziland
Vatikanstaten
Usbekistan
Tanzania
Åland
Vietnam
Gambia
Togo
Tunisia
Uganda
Vest-Sahara
Zambia
Zimbabwe