Publiser produktene dine

Style 735 FireLock® Fire Pump Test Meter

Arkivert

Style 735 FireLock® Fire Pump Test Meter

The Style 735 Victaulic® Fire Pump Test Meter was specifically designed for the monitoring of fire protection systems. Style 735 consists of a calibrated Victaulic Venturi with attached dial meter (specify Model “S”, 41/2"/120 mm dial meter; or Model “L”, 6"/150 mm dial meter) and flow reading in GPM (gallons per minute) or m3/hr. (cu. meters/hour). Quickly installed on the discharge side of the pump with just two Victaulic couplings, the Style 735 provides accurate measurements of pump performance.

The Victaulic Fire Pump Test Meter is designed for use with Victaulic FM Approved products in 21/2 – 12"/65 – 300 mm sizes. Maximum working pressure for Model “L” is 175 psi/1200 kPa, Model “S” is rated to 500 psi/3450 kPa.

Tekniske spesifikasjoner

Unik ref.victaulic-style735
ProduktfamiliePiping Methods
ProduktgruppePipework Fittings
TypeObjekt (enkelt objekt)
Utgivelsesdato2012-12-17
Utgavenummer1

Lenker

Produktets nettadressehttp://www.victaulic.com/en/products-services/products/firelock-style-735-fire-pump-test-meter/

Relatert

HovedmaterialeKarbonstål
Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriRørsystem - Rør

Lignende produkter

bilde for VALSIR SILERE

Valsir VALSIR SILERE

4.3 (14)

bilde for SeaCor CPVC

GF Piping Systems SeaCor CPVC

4.4 (9)

bilde for SYGEF Standard Pipe & Fittings

GF Piping Systems SYGEF Standard Pipe & Fittings

bilde for Water Hammer Arrestors - 15M2

Watts Water Hammer Arrestors - 15M2

4.7 (21)

bilde for Repolen PPR Monolayer Pipes

Reboca Repolen PPR Monolayer Pipes

bilde for SYGEF Plus Pipe & Fittings

GF Piping Systems SYGEF Plus Pipe & Fittings

Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

Arbeid direkte med BIM-objekter ved siden av Revit
2 GB skylagring – lagre Revit-innholdet ditt
Få LCA for innebygd karbon (A1–A3) direkte fra Revit