Publiser produktene dine

VK180 - Quick Response Dry Pendent Sprinkler (K5.6)

The Viking Corporation

Arkivert

VK180 - Quick Response Dry Pendent Sprinkler (K5.6)

Viking Quick Response Dry Pendent Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings are listed/approved for installation in corrosive environments. Refer to technical data sheet for design and installation requirements.

Spesifikasjon

K-Factor: K5.6 (80)
Manufacturer: Viking
Page: F_031793
Part Number: 08383U,08385U,08387U,16453U,16455U,16457U
VK Number: VK180
Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Quick Response
Occupancy Type: Light, Ordinary
Thread Size: 1" NPT (25 mm BSP)
Min Spacing: Per Standards / Listings
Max Spacing: Per Standards / Listings

Tekniske spesifikasjoner

Unik ref.vk180-quick-response-pendent-sprinkler-k56
ProduktfamilieViking Dry Barrel Sprinklers
ProduktgruppeViking - Dry Pendent Recessed Esc / Pendent
TypeObjekt (enkelt objekt)
Utgivelsesdato2021-01-25
Utgavenummer1

Lenker

Produktets nettadressehttps://www.vikinggroupinc.com/qr-dry-pendent-sprinkler-k56
Produktsertifiseringhttps://www.vikinggroupinc.com/sites/default/files/documents/031793.pdf
Teknisk beskrivelsehttps://www.vikinggroupinc.com/sites/default/files/documents/031793.pdf

Relatert

Designet iUSA
Produsert iUSA

Klassifisering

BIMobject kategoriBrannprodukter - Sprinklersystemer
ETIM-kodeEC011373
ETIM-navnDry sprinkler
UNSPSC-navnFire sprinkler heads
UNSPSC-kode46191610
Uniclass 2015 kodePr_70_55_97_84
Uniclass 2015 beskrivelseSprinkler heads
CSI MasterFormat 2014 kode21 13 00
CSI MasterFormat 2014 tittelFire-Suppression Sprinkler Systems
OmniClass-nummer23-29 33 11 11 13
OmniClass-tittelDry Pendant Sprinkler Heads
CSI UniFormat II kodeD4010
CSI UniFormat II tittelSprinklers

Lignende produkter

bilde for Wilkins FP63 Mechanical Tees

Zurn Wilkins FP63 Mechanical Tees

4.2 (9)

bilde for Model 2511A TESTanDRAIN® - Threaded Single Handle Ball Valve

AGF Manufacturing Model 2511A TESTanDRAIN® - Threaded Single Handle Ball Valve

bilde for Model 1011T TESTanDRAIN® - Single Handle Ball Valve

AGF Manufacturing Model 1011T TESTanDRAIN® - Single Handle Ball Valve

bilde for Model 2500 TESTanDRAIN® - Grooved Single Handle Ball Valve

AGF Manufacturing Model 2500 TESTanDRAIN® - Grooved Single Handle Ball Valve

bilde for FP23 Couplings

Zurn FP23 Couplings

bilde for Model 8011 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

AGF Manufacturing Model 8011 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

4.5 (11)

Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

Arbeid direkte med BIM-objekter ved siden av Revit
2 GB skylagring – lagre Revit-innholdet ditt
Få LCA for innebygd karbon (A1–A3) direkte fra Revit