500XLYSBR Water Pressure Reducing Valve with Wye Strainer
Wilkins

500XLYSBR Water Pressure Reducing Valve with Wye Strainer

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consisting of a low lead bronze body and bronze bell housing, a separate access cover for the plunger and a bolt to adjust the downstream pressure. The bronze bell housing and access cap shall be threaded to the body and shall not require the use of ferrous screws. The assembly shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions. The assembly shall be accessible for maintenance without having to remove the body from the line. The Pressure Reducing Valve shall be a WILKINS Model 500XLYSBR.

Compliance:

• ASSE® Listed 1003 (1/2” thru 2 1/2”)
• cUPC® Listed (1/2” thru 2”)
• CSA® Certified B356 (1/2” thru 2”)
• City of Los Angeles Approved (1/2” thru 2”)
• Meets the requirements of NSF/ANSI/CAN 61 and 372*
*(Less Than 0.25% Weighted Average Lead Content)

Features:

  • Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"
  • Maximum working water pressure: 300 psi
  • Maximum working water temperature: 140° F
  • Reduced pressure range: 25 psi to 75 psi
  • Factory preset: 50 psi
  • Threaded connections (FNPT): ANSI B1.20.1
  • Copper connections (FC): ANSI B16.22
Spesifikasjon
  • Wilkins model 500XLYSBR is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The high flow capacity makes this device most suitable for industrial water lines and commercial water systems. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

    keywords: Emergency and Public Entrance Areas, and Grounds,Healthcare,Boiler/Mechanical Rooms,Retail,Custodial Closets,Office,Commercial,Boiler Rooms and Custodial Areas,Hospitality,Industrial,Janitorial Closets/Custodial Closets,Manufacturing Floor,Spill Containment Area/Wash Down Area,Commercial Turf,Irrigation,Drip Irrigation,Residential/Commercial Irrigation,Green House,School Systems,Educational Facilities,Universities,Government Buildings,High Rise Buildings,Military,Parking Deck,Sports Complex/Recreational Center,Parking Lots,Turf/Field/Track,Residential Multi-Family,Residential/Light Commercial,Landscaping,Residential Single-Family,Outdoor Kitchen,Correctional/Institutional,Architectural/Aesthetics,Development,Civil,Roads,Sidewalks,Highways,Transportation,Interstates,Toll Road,Distribution,Waterworks,Pump Stations,Food Service,Industrial/Processing Plant,Parking/Garages,Pressure Reducing Valves,Lead-Free Products,Zurn Wilkins Water Control,Power Generation,Zurn Wilkins Pressure Reducing Valves,CA Mandatory Water Reduction,Lead-Free Law Compliance,MasterSpec,Retrofit and Replacement,Water Conservation,Zurn Wilkins,00XLYSBR,0XLYSBR,strainer,12-500XLYSBR,34-500XLYSBR,1-500XLYSBR,114-500XLYSBR,112-500XLYSBR,2-500XLYSBR

Tekniske spesifikasjoner
  • Unik ref.500XLYSBR
  • ProduktfamilieAdjusting/Controlling Valves for Liquid Services
  • ProduktgruppeWater Pressure Reducing Valves
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2026-08-25
  • Utgavenummer1
Relatert
  • HovedmaterialeBronze
  • Designet iUSA
Klassifisering
  • BIMobject kategoriRørsystem - Ventiler

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA
BIMobject-produktbibliotek

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit