Z1201-ND EZCarry® High Performance Water Closet Adjustable Horizontal Back to Back Siphon Jet No-Hub
Z1201-ND EZCarry® High Performance Water Closet Adjustable Horizontal Back to Back Siphon Jet No-Hub
    Zurn

    Z1201-ND EZCarry® High Performance Water Closet Adjustable Horizontal Back to Back Siphon Jet No-Hub

    4.4 av 5 stjerner4.4(12 anmeldelser)

    EZCarry® horizontal siphon jet water closet carrier system with high performance waterway and 3” [76mm] no-hub connections. System includes Dura-Coated cast iron double main fitting with hydro-mechanically optimized sweep and extended 2” [51mm] vent, adjustable faceplates, QuickFit™ faceplate gaskets, floor mounted pre-fab slotted foot supports with top anchoring pre-fab support base, fixture bolts, trim, stud protectors, bonded “Neo-Seal” gaskets, and corrosion resistant, adjustable 3” [76mm] dia. X 6” [152mm] couplings with integral test caps designed to increase flow velocity and line carry. EZCarry® system complies with the requirements of ASME A112.6.1M up to a 500 lbs [227 kg] static load rating.

    Compliance:

    • A112.6.1M up to a 500 lb static load rating.

    Features:

    • Propel waste up to three times farther, reducing the possibility of low-flow system clog for overall plumbing system protection
    • Protect facilities from excessive loading with standard system design for loading up to 500 lb
    • Install faster with labor saving features on a 30% lighter system
    • Reduce maintenance emergencies with carriers designed to optimize waste line carry
    • Maintain a sanitary environment with wall-mounted fixture
    • Test the system and cut the coupling to length from the front with Zurn's patent-pending EZ-SET™ coupling option
    • Reduce adjustment time with factory-assembled trim and universal feet pre-set at 5-1/2" rough-in height

    Additional Models Available

    Z1201-ND3 | Z1201-ND3 (Floor Mount) | Z1201-ND3-FMBO | Z1201-ND4 | Z1201-ND4 (Floor Mount) | Z1201-ND4-FMBO | Z1201-ND4-RYK17

    Keywords: zurn z1201, Water Closet Carrier, Siphon Jet, Siphon Jet No Hub, EZCarry, Water Closet Carrier System, EZCarry system, faceplate gasket, gasket holes, tapped holes, faceplate slots, ratcheting wrench, faceplate bolts, ratcheting wrench, o-ring seal, NPT threaded coupling, NPT threaded faceplate, pipe sealant, coupling wrench, Neo-Seal Gaske, water closet outlet

    Tekniske spesifikasjoner
    • Unik ref.zurn-z1201-nd3
    • ProduktfamilieCarriers & Fixture Supports
    • ProduktgruppeWater Closet & Toilet Carriers
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2018-08-02
    • Utgavenummer6
    • Høyde (tommer)18
    • Bredde (tommer)9
    • Dybde (tommer)12
    Relatert
    • HovedmaterialeCast iron
    • Designet iUSA
    • Nettovekt (pund)104
    Klassifisering
    • BIMobject kategoriRørsystem - drenering
    • IFC-klassifiseringSanitærterminal
    • ETIM-kodeEC011338
    • ETIM-navnAccessories for double wall/built-in element sanitary
    • Uniclass 2015 kodePr_20_85_09_96
    • Uniclass 2015 beskrivelseWall-hung WC support brackets
    • CSI MasterFormat 2014 kode22 42 13.13
    • CSI MasterFormat 2014 tittelCommercial Water Closets
    • OmniClass-nummer23-31 19 19
    • OmniClass-tittelWater Closets 

    Tilgjengelighet etter region

    Nord Amerika
    Anguilla
    Antigua og Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Cayman Islands
    Costa Rica
    Cuba
    Curaçao
    Den dominikanske republikk
    Dominica
    El Salvador
    Grenada
    Grønland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Jomfruøyene
    Jomfruøyene
    Karibisk Nederland
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts og Nevis
    Saint Lucia
    Saint Pierre og Miquelon
    Saint Vincent og Grenadinene
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad og Tobago
    Turks- og Caicosøyene
    USA
    Common.Footer.ValueProp.Image.AltText

    Design App for Revit

    Last inn familier direkte i Revit-modellen din med ett klikk

    Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

    • Huk avArbeid direkte med BIM-objekter ved siden av Revit
    • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
    • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit