Opublikuj swoje produkty
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
Santa-Fe Ultra70 Whole House Ventilating Dehumidifier
    AprilAire

    Santa-Fe Ultra70 Whole House Ventilating Dehumidifier

    The Santa-Fe Ultra70 is the first compact, high-efficiency, whole house ventilating dehumidifier designed to fit in tight, low-clearance applications.

    Ideal Applications

    • Basements
    • Crawl spaces
    • Garages
    • Home theaters
    • Workshops
    • Gun rooms
    • Exercise rooms
    • New home
    • Whole home
    • Ventilation
    • Commercial


    The Santa-Fe Ultra70 removes up to 70 pints per day, exceeds Department of Energy standards and provides effective air filtration (MERV-13). The Santa-Fe Ultra70 is ideal for a small home, condo, or apartment applications.

    The Santa-Fe Ultra70 has an innovative cabinet design that easily converts to either vertical or horizontal airflow discharge which allows for easier installation in tight spaces. Flexible airflow configurations allow the Santa Fe Ultra70 to be installed in locations where other dehumidifiers don’t fit due to duct issues and size constraints.

    Optional fresh outdoor air may be ducted to the unit via a “T” to the inlet duct. This provides fresh air to dilute pollutants and maintain a normal oxygen content in the air. The amount of fresh air ventilation can be regulated by a variety of dampers and controls.

    Opis
      • Part Number: 4044100
      • Pint Capacity: 70 pints / 8.75 gallons @ 80°F and 60% RH
      • Power: 492 watts @ 73°F and 60% RH
      • Supply Voltage: 115 volt – 1 phase – 60 Hz
      • Current Draw: 4.1 amps @ 73°F and 60% RH

      Blower

      • 150 CFM @ 0.0" WG
      • 140 CFM @ 0.2" WG
      • 130 CFM @ 0.4" WG
      • Average Sound Level: 55.3 dBA

      Operating Temperature

      • 49°F min., 95°F max. (inlet air temperature)
      • 34°F min., 135°F max. (outside cabinet)
      • Control Type: Onboard controls with low voltage terminal block
      • Sizing: Up to 1,800 sq. ft.

      Performance at 80°F and 60% RH

      • Water Removal: 70 pints/day
      • Efficiency: 5.5 pints/kWh

      Performance at 73°F and 60% RH

      • Water Removal: 52.45 pints/day
      • Efficiency: 4.31 pints/kWh

      Air Filter

      • MERV-13 filter
      • Size: 11.38"W × 9.00"H × 0.75"D
      • Part Number: 4037724
      • Unit Dimensions: 12"W × 12"H × 28"D
      • Unit Weight: 55 lbs.
      • Shipping Dimensions: 15"W × 16"H × 31"D
      • Shipping Weight: 65 lbs.
    Specyfikacja techniczna
    • Nr referencyjnysanta-fe-ultra70-whole-house-ventilating-dehumidifier
    • Rodzina produktuDehumdification
    • Grupa produktuWhole House Dehumidifiers
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-04-06
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyMetal
    • Zaprojektowano wStany Zjednoczone
    • Wyprodukowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectHVAC - Wentylacja mechaniczna
    • Uniclass 2015 CodePr_65_67_39
    • Uniclass 2015 DescriptionHumidifiers and dehumidifiers
    • CSI MasterFormat 2014 Code23 84 16
    • CSI MasterFormat 2014 TitleMechanical Dehumidification Units
    • OmniClass Number23-33 27 13
    • OmniClass TitleDehumidifiers

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit