Opublikuj swoje produkty
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair
    ARDEX

    ARDEX RA 56 - Low-Viscosity Rigid Hybrid Polyurethane Crack & Spall Repair

    ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive. It is a rapid curing concrete repair material used when minimal down time is crucial. Its low viscosity offers deep penetration into hairline cracks for a structural repair. The addition of dry, bagged aggregate makes a quality spall repair product that is ready for grinding and open to traffic in less than 1 hour.

    Substrates:

    • Concrete
    Opis
    • Colour: Grey Viscosity Mixed: 60 centipoise Gel Time (+24°C): 2 - 3 minutes Cure Time (+24°C): 60 minutes (reopen to traffic) Tack-free Time (+24°C): 12 minutes Compressive Strength 1 hour (neat): 33.8 MPa Compressive Strength 24 hour (neat): 36.5 MPa Tensile Strength: 28.7 MPa Elongation: 5% Bond Strength: 13.1 MPa Shore D Hardness: 70 Adhesion to Concrete: 1.9 MPa
    Specyfikacja techniczna
    • Nr referencyjnyArdex-ra-56
    • Rodzina produktuConcrete Repair
    • Grupa produktuCrack and Spall Repair
    • TypObiekt (jeden obiekt)
    • Data publikacji2019-08-26
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyNa bazie cementu
    • Zaprojektowano wAustralia
    • Wyprodukowano wAustralia
    Klasyfikacja
    • Kategoria BIMobjectMateriały budowlane - Beton
    • UNSPSC nameInterior finishing materials
    • UNSPSC code3016
    • Uniclass 2015 CodePr_35
    • Uniclass 2015 DescriptionCovering and finishing products
    • CSI MasterFormat 2014 Code09 00 00
    • CSI MasterFormat 2014 TitleFinishes
    • OmniClass Number23-15 00 00
    • OmniClass TitleInterior and Finish Products
    • CSI UniFormat II CodeC30
    • CSI UniFormat II TitleINTERIOR FINISHES

    Dostępny w krajach:

    Oceania Azja
    Australia
    Singapur
    Nowa Zelandia
    Tajlandia
    Biblioteka produktów BIMobject

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit