Opublikuj swoje produkty
SINTESI Wall Wi-Fi and radiofrequency chronothermostat
Emmeti SPA

SINTESI Wall Wi-Fi and radiofrequency chronothermostat

Electronic chronothermostat with Wi-Fi connection and radiofrequency module, weekly programming and wall installation, designed for room temperature regulation both in heating mode (winter) and in air conditioning mode (summer).
The free app, available on the AppStore and Google Play, allows programming and complete control even from your smartphone or tablet. Any alarm situations are reported by sending a mail to the specified address.
The activation of the heat generator can take place by means of a remote actuator (controlled by sending a radio frequency signal), or via cable (thanks to the relay on board).
The keypad consists of four touch keys located on the sides of the display. The color of the display backlight can be customized by the user.

Opis
  • Electronic chronothermostat with Wi-Fi connection and radio frequency module, weekly programming and wall installation, designed for adjusting the room temperature both in heating mode (winter) and in air conditioning mode (summer).
    The free "Emmeti Sintesi" App, available on the AppStore (for iOS systems) and Google Play (for Android systems) and compatible with Google Home and Amazon Echo, allows programming and complete control even from your smartphone or tablet.
    Any alarm situations are reported by sending an email to the specified address.
    The activation of the heat generator can take place by means of a remote actuator (controlled by sending a radio frequency signal), or via cable (thanks to the relay on board).
    The keypad consists of four touch keys located on the sides of the display.
    The color of the display backlight can be customized by the user.


    Technical data:

    Fixing: to the wall or to cover on a standard 503 box
    Power supply 230Vac (-15% ÷ + 10%) 50 / 60Hz
    Maximum consumption: 6 VA / 230Vac
    Relay capacity at 250 Vac: 5 A
    Operating modes: summer / winter / off
    Type of regulation: ON / OFF, proportional or setpoint sending for autonomous management of the radiofrequency actuator
    Differential: 0.1 ÷ 1 ° C
    Programming: weekly, minimum interval 1 hour
    Settable temperatures: 3 + manual + antifreeze
    Settable setpoint: 2 ÷ 50 ° C
    Measured temperature resolution: 0.1 ° C
    Measurement accuracy: 0.5 ° C
    Antifreeze temperature (excludable): 1 ÷ 50 ° C
    Ignition delay: 15, 30 or 45 minutes
    Accuracy of the clock: ± 1 s / day
    Relative humidity display: range 20 ÷ 90%
    Keypad lock with password to prevent changes by unauthorized persons
    Automatic change of daylight saving time and automatic synchronization of date and time when connected to the network
    Operating temperature: 0 ÷ 50 ° C
    Storage temperature: -10 ÷ 65 ° C
    Operating humidity: 20% ÷ 90% RH non condensing
    Degree of protection: IP40

    Compatible with radiofrequency actuators both for DIN bar and chronothermostatic for thermostatic valves
    Maximum distance between SINTESI WALL WI-FI RF and radiofrequency actuator: 50 meters in free field
    Delegated Regulation (EU) n. 811/2013; annex IV-3:
    - Class of the temperature control device: Class 4; Class IV
    - Contribution of the temperature control device to seasonal space heating energy efficiency in%: 2%
    Display with configurable backlight: always off, color chosen from 48 possible shades or variable between red, green and blue based on the difference between the measured temperature and the set one.

    Dedicated application "" Emmeti Sintesi "", which allows you to remotely control the thermostat using your smartphone or tablet.

    In detail:
    - turn on and off the air conditioning system;
    - create and modify weekly programs;
    - change the values of the operating temperatures;
    - simplify programming thanks to the copy-paste of a program over several days;
    - set holiday days in which the system remains off;
    - configure e-mail address to receive notifications when the measured temperature has exceeded a minimum or maximum value that can be set;
    - block the operation from the keyboard ("local operation block"), allowing the control of the device only from the App itself. 

Specyfikacja techniczna
  • Nr referencyjnyChronothermostat_SINTESI_Wifi_RF
  • Rodzina produktuTemperature Controls
  • Grupa produktuSintesi
  • TypObiekt (jeden obiekt)
  • Data publikacji2020-10-27
  • Numer edycji1
  • Wysokość (mm)85
  • Szerokość (mm)130
  • Głębokość (mm)28
Dodatkowe informacje
  • Materiał głównyPlastikowy
  • Zaprojektowano wWłochy
  • Wyprodukowano wWłochy
Klasyfikacja
  • Kategoria BIMobjectHVAC - Panele sterowania - termostaty
  • CSI MasterFormat 2014 Code23 09 00
  • CSI MasterFormat 2014 TitleInstrumentation and Control for HVAC
  • OmniClass Number23-27 15 23
  • OmniClass TitleHVAC Controls

Dostępny w krajach:

Europa
Albania
Andora
Austria
Belgia
Białoruś
Bośnia i Hercegowina
Bułgaria
Chorwacja
Cypr
Czarnogóra
Czechy
Dania
Estonia
Finlandia
Francja
Gibraltar
Grecja
Guernsey
Hiszpania
Holandia
Irlandia
Islandia
Jersey
Liechtenstein
Litwa
Łotwa
Luksemburg
Macedonia Pólnocna
Malta
Man
Mołdawia
Monako
Niemcy
Norwegia
Polska
Portugalia
Rosja
Rumunia
San Marino
Serbia
Słowacja
Słowenia
Svalbard
Szwajcaria
Szwecja
Ukraina
Watykan
Węgry
Wielka Brytania
Włochy
Wyspy Alandzkie
Wyspy Owcze
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit