Opublikuj swoje produkty
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
    Helty

    Flow600 heat recovery ventilator

    Ideal for installations in hospitality facilities, offices, schools and kindergartens, Flow600 Steel allows flexible modulation of the air renewal rate with air flow rates ranging from 250 m³/h (minimum speed) up to 600 m³/h (maximum speed in hyperventilation), with four intermediate air flow settings. This ensures maximum design flexibility for applications requiring high air change rates in medium- to high-occupancy environments. The unit is equipped with an enthalpy cross-flow heat exchanger, ensuring heat recovery efficiency of up to 82% and requiring no condensate drain. Excellent filtration performance is guaranteed by the Coarse 80% + ePM1 80% filter set, supplied as standard. Flow600 is natively integrated into a white-painted steel cover, complete with air supply and exhaust openings, allowing exposed installation without the need for additional aesthetic cladding. The unit can be installed ceiling-mounted or in a vertical wall-mounted configuration, using a dedicated duct-cover casing that allows management of air supply and exhaust connections on either the right or left side, to meet specific design requirements. Installation requires only two 200 mm core drillings on the perimeter wall, or alternatively four 100 mm openings. Thanks to the CO₂ and VOC sensors, Flow600 is able to monitor key parameters for occupant well-being, such as relative humidity, carbon dioxide levels and volatile organic compounds. By detecting values in real time, the HRV unit automatically adjusts the air renewal rate according to the actual needs of the ventilated environment.
    Specyfikacja techniczna
    • Nr referencyjnyFlow600
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-02-09
    • Numer edycji1
    Dodatkowe informacje
    • Zaprojektowano wWłochy
    • Wyprodukowano wWłochy
    Klasyfikacja
    • Kategoria BIMobjectHVAC - Odzysk ciepła

    Dostępny w krajach:

    Europa
    Albania
    Andora
    Austria
    Belgia
    Białoruś
    Bośnia i Hercegowina
    Bułgaria
    Chorwacja
    Cypr
    Czarnogóra
    Czechy
    Dania
    Estonia
    Finlandia
    Francja
    Gibraltar
    Grecja
    Guernsey
    Hiszpania
    Holandia
    Irlandia
    Islandia
    Jersey
    Liechtenstein
    Litwa
    Łotwa
    Luksemburg
    Macedonia Pólnocna
    Malta
    Man
    Mołdawia
    Monako
    Niemcy
    Norwegia
    Polska
    Portugalia
    Rosja
    Rumunia
    San Marino
    Serbia
    Słowacja
    Słowenia
    Svalbard
    Szwajcaria
    Szwecja
    Ukraina
    Watykan
    Węgry
    Wielka Brytania
    Włochy
    Wyspy Alandzkie
    Wyspy Owcze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit