Opublikuj swoje produkty
50 STATIC TROFFER
50 STATIC TROFFER
50 STATIC TROFFER

    50 STATIC TROFFER

    FEATURES

    • Frosted prismatic lens provides pleasing diffused light without LED pixelation
    • Fully-enclosed spring-loaded cam latches provide hassle-free room-side maintenance
    • Triple gasketing and inverted lens options for smooth surface room-side
    • T-slot steel hinge ensures positive retention when door is opened
    • Back reinforcement ribs and rolled-edge channel adds superior strength
    • Integral T-bar clips quickly secure fixture to structure (2x2 and 2x4 only)
    • High-performance up to 139 lm/W
    • Rated for direct contact with insulation
    • Fully gasketed door protects against contaminants
    • Optional tamper-resistant screws secure door frame
    • Variety of door frame and shielding options
    • Listed for wet location under covered ceiling option
    • Double and triple gasketing options
    • Quick-wire access plate in back of fixture housing for easy attachment of incoming power supply
    • 1x4, 2x2, and 2x4 sizes available
    • All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion
    • Buy American Act compliant
    • Wireless in-fixture control solutions available
    • Made Right Here® in the USA
    Opis
    • Housing

      22-gauge die-formed C.R.S.

      Door Frame

      20-gauge C.R.S. or.050″ extruded aluminum, flat or regress, with mitered corners. T-slot steel hinge allows reversible hinging and latching. Fully enclosed spring-loaded cam latches.

      Shielding

      Frosted acrylic, pattern #12, .125″ thick.

      Finish

      92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

      Electrical

      High-quality mid-power LED board. 25°C maximum ambient operating temperature.

      Mounting

      NEMA Type “G” 15/16″ or 1″ grid standard. For NEMA Type “NFG” and “SG” 9/16″ grid installations, specify EQCLIPS option. Drywall flange type available.

      Listings

      • cCSAus certified as luminaire suitable for dry or damp locations.
      • IC-rated for direct contact with insulation.
      • City of Chicago Environmental Air approved when specified with CP option.
      • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.

      Warranty

      5-year limited warranty, see details
    Specyfikacja techniczna
    • Nr referencyjny50-statictroffer
    • Rodzina produktuIndoor Luminaires
    • Grupa produktuTroffers
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-02-27
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyMetal
    • Materiał dodatkowySzkło
    • Zaprojektowano wStany Zjednoczone
    • Wyprodukowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectOświetlenie - Oświetlenie sufitowe
    • Klasyfikacja IFCUmocowanie światła
    • Uniclass 2015 CodeEF_70_80
    • Uniclass 2015 DescriptionLighting
    • CSI MasterFormat 2014 Code26 51 13
    • CSI MasterFormat 2014 TitleInterior Lighting Fixtures, Lamps, And Ballasts
    • OmniClass Number23-35 47 11
    • OmniClass TitleLighting Fixtures

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit