EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2–Splash Zone certified
Precisely formed lens provides maximum efficiency/reduced glare
Seamless closed-cell gasket, poured and formed in place
Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
Liquid-tight power entry
Standard stainless steel latches protect the fixture from corrosion in harsh environments
Tamper-resistant latches available
Low ambient option for extreme cold environments such as walk-in freezers and refrigerated spaces
High-performance up to 158 lm/W
DLC Compliant
Build America, Buy America and Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Opis

Enclosure	Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.
Internal Housing	.050″ aluminum.
Latching	Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).
Reflector	95% reflective highly specular aluminum.
Reflective Surfaces	92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.
Shielding	Frosted, impact-resistant acrylic.
Electrical	High-quality mid-power LED board. L70 >72,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option. 50/60 Hz constant current driver.
Power Supply	Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.
Mounting	Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.
Listings	• cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option. • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X. • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL. • Pressure wash rated to 1500 PSI. • RoHS compliant. • Build America, Buy America (BABA) and Buy American Act (BAA) compliant. Request certification at hew.com/buy-american.
Warranty	5-year limited warranty, see details

Specyfikacja techniczna

Nr referencyjnyegl-enclosedgasketed-industrial
Rodzina produktuIndoor Luminaires
Grupa produktuVandal Resistant
TypObiekt (jeden obiekt)
Data publikacji2025-06-18
Numer edycji1

Linki

Url produktuhttps://hew.com/products/EGL
Instrukcja montażuhttps://hew.com/instruction/EGL2_instructions.pdf
Opis technicznyhttps://hew.com/specifications/EGL_led.pdf

Dodatkowe informacje

Materiał głównyMetal
Materiał dodatkowySzkło
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectOświetlenie - Oświetlenie sufitowe
Klasyfikacja IFCUmocowanie światła
Uniclass 2015 CodeEF_70_80
Uniclass 2015 DescriptionLighting
CSI MasterFormat 2014 Code26 51 13
CSI MasterFormat 2014 TitleInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass Number23-35 47 11
OmniClass TitleLighting Fixtures

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze