Opublikuj swoje produkty
Is Box
IVAR

Is Box

IS-BOX is a box with a pair of pre-installed 3+1 and 4+1 outlet sanitary manifolds, suitable for wall recessing even in bathrooms covered with tiles or valuable materials. The reduced size allows it to be installed in brick or plasterboard walls with a minimum thickness of 60 mm. The manifolds are compatible with drinking water and the inlets can be shut off by screw sealing valves and replaceable headworks. Available in two colours (white and chrome), also in the completely inspectable version.
Opis
  • IS-BOX is a box with pre-assembled sanitary manifolds, suitable for recessed installation. The manifolds for hot and cold water have 3 and 4 outlets respectively. The IS-BOX manifold fi ttings are 3/4’’ EK, with a spacing of 40 mm. Where appropriate, for each additional manifold, an additional outlet can be created by removing the caps from the fi tting on the right: in this case, the thread released is 1/2’’ F. The misalignment between the manifold gaps is 16.5 mm. The inlets to the two manifolds accept adduction tubes with a maximum diameter of 20 mm. KIT INCLUSIVE OF: - Domestic hot water manifold - Domestic cold water manifold - Screw-controlled interception valve - Threaded cap - Flush box 58 - 73 mm - Interception valve plastering protection - Plastering protection (serves as a cover in models that cannot be inspected) - Key for manual interception valve activation in the absence of knobs - Interception valve cover plate (perforated in models with knobs) - Visible cover for models that can be fully inspected - Chrome-plated knobs for interception valves - Disks and fastening screws CONDITIONS OF USE Maximum static operating pressure: 10 bar. Fluid in contact: drinking water. Maximum fl uid temperature: 100 °C. MATERIALS Manifold body: brass CW617N. Sealing elements: Peroxide EPDM. Screw-controlled interception valve stem, body and rod: brass CW617N. Key: PA + 30% FV. Protective box and cover: 40% talc-filled PP. Plate: ABS, white or chrome-plated. Front cover (for versions that can be inspected only): ABS, white or chrome-plated. INSTALLATION Prepare a cavity in the wall with the following dimensions: height H ≥ 182 mm, width W ≥ 268 mm; depth D ≥ 58 mm. MODELS AVAILABLE 1) IS-BOX 1 • Interception valves that can be inspected and activated using a special key; • Code 506592: RAL 9010 ; code 506592CR: chrome-plated 2) IS-BOX 2 • Box that can be fully inspected; • Interception valves that can be activated using a special key; • Code 506593: RAL 9010 ; code 506593CR: chrome-plated 3) IS-BOX 3 • Interception valves that can be inspected and activated using knobs; • Code 506594: RAL 9010 ; code 506594CR: chrome-plated 4) IS-BOX 4 • Box that can be fully inspected; • Interception valves that can be activated using knobs; • Code 506595: RAL 9010 ; code 506595CR: chrome-plated
Specyfikacja techniczna
  • Nr referencyjnyIS-BOX
  • Rodzina produktuSanitary System
  • Grupa produktuIS·BOX
  • TypObiekt (jeden obiekt)
  • Data publikacji2018-07-02
  • Numer edycji1
Dodatkowe informacje
  • Materiał głównyMosiądz
  • Materiał dodatkowyStal
  • Zaprojektowano wWłochy
  • Wyprodukowano wWłochy
Klasyfikacja
  • Kategoria BIMobjectHydraulika - Hydraulika - pozostałe
  • Klasyfikacja IFCElement dystrybucji przepływu
  • Kod ETIMEG000002
  • Nazwa ETIMInstallation pipes/cable protection tubes
  • UNSPSC namePlumbing fixtures
  • UNSPSC code3018
  • Uniclass 2015 CodeSs_55_70
  • Uniclass 2015 DescriptionWater distribution and supply systems
  • CSI MasterFormat 2014 Code35 20 13.19
  • CSI MasterFormat 2014 TitleHydraulic Manifolds
  • OmniClass Number23-39 21 13 21
  • OmniClass TitleManifolds
  • CSI UniFormat II CodeD20
  • CSI UniFormat II TitlePLUMBING

Dostępny w krajach:

Europa Azja Ameryka północna Afryka Ameryka Południowa Oceania
Albania
Afganistan
Anguilla
Algieria
Argentyna
Australia
Andora
Arabia Saudyjska
Antigua i Barbuda
Angola
Boliwia
Dalekie Wyspy Mniejsze Stanów Zjednoczonych
Austria
Armenia
Aruba
Benin
Brazylia
Fidżi
Belgia
Azerbejdżan
Bahamy
Botswana
Chile
Guam
Białoruś
Bahrajn
Barbados
Burkina Faso
Ekwador
Kiribati
Bośnia i Hercegowina
Bangladesz
Belize
Burundi
Falklandy (Malwiny)
Mariany Północne
Bułgaria
Bhutan
Bermudy
Czad
Gujana
Mikronezja
Chorwacja
Brunei Darussalam
Brytyjskie Wyspy Dziewicze
Demokratyczna Republika Konga
Gujana Francuska
Nauru
Cypr
Brytyjskie Terytorium Oceanu Indyjskiego
Curaçao
Dżibuti
Kolumbia
Niue
Czarnogóra
Chiny
Dominika
Egipt
Paragwaj
Norfolk
Czechy
Filipiny
Dominikana
Erytrea
Peru
Nowa Kaledonia
Dania
Gruzja
Grenada
Etiopia
Surinam
Nowa Zelandia
Estonia
Hongkong
Grenlandia
Gabon
Urugwaj
Palau
Finlandia
Indie
Gwadelupa
Gambia
Wenezuela
Papua-Nowa Gwinea
Francja
Indonezja
Gwatemala
Ghana
Pitcairn
Gibraltar
Irak
Haiti
Gwinea
Polinezja Francuska
Grecja
Iran
Holandia Karaibska
Gwinea Bissau
Samoa
Guernsey
Izrael
Honduras
Gwinea Równikowa
Samoa Amerykańskie
Hiszpania
Japonia
Jamajka
Kamerun
Timor Wschodni
Holandia
Jemen
Kajmany
Kenia
Tokelau
Irlandia
Jordania
Kanada
Komory
Tonga
Islandia
Kambodża
Kostaryka
Kongo
Tuvalu
Jersey
Katar
Kuba
Lesotho
Vanuatu
Liechtenstein
Kazachstan
Martynika
Liberia
Wallis i Futuna
Litwa
Kirgistan
Meksyk
Libia
Wyspy Cooka
Łotwa
Korea Północna
Montserrat
Madagaskar
Wyspy Marshalla
Luksemburg
Korea Południowa
Nikaragua
Majotta
Wyspy Salomona
Macedonia Pólnocna
Kuwejt
Panama
Malawi
Malta
Laos
Portoryko
Mali
Man
Liban
Saint Kitts i Nevis
Maroko
Mołdawia
Makau
Saint Lucia
Mauretania
Monako
Malediwy
Saint Martin
Mauritius
Niemcy
Malezja
Saint Vincent i Grenadyny
Mozambik
Norwegia
Mongolia
Salwador
Namibia
Polska
Myanmar (Birma)
Sint Maarten
Niger
Portugalia
Nepal
Stany Zjednoczone
Nigeria
Rosja
Oman
Trynidad i Tobago
Republika Południowej Afryki
Rumunia
Pakistan
Turks i Caicos
Republika Środkowoafrykańska
San Marino
Palestyna
Wspólnota Saint-Barthélemy
Reunion
Serbia
Singapur
Wspólnota Terytorialna Saint Pierre i Miquelon
Rwanda
Słowacja
Sri Lanka
Wyspy Dziewicze
Sahara Zachodnia
Słowenia
Syria
Senegal
Svalbard
Tadżykistan
Seszele
Szwajcaria
Tajlandia
Sierra Leone
Szwecja
Tajwan
Somalia
Ukraina
Turcja
Suazi
Watykan
Turkmenistan
Sudan
Węgry
Uzbekistan
Sudan Południowy
Wielka Brytania
Wietnam
Święta Helena
Włochy
Wyspa Bożego Narodzenia
Tanzania
Wyspy Alandzkie
Wyspy Kokosowe
Togo
Wyspy Owcze
Zjednoczone Emiraty Arabskie
Tunezja
Uganda
Wybrzeże Kości Słoniowej
Wyspy Świętego Tomasza i Książęca
Wyspy Zielonego Przylądka
Zambia
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit