Opublikuj swoje produkty
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
TracPipe® System | Regulator 2 PSI
    OmegaFlex

    TracPipe® System | Regulator 2 PSI

    TracPipe® CounterStrike® 2 PSI gas regulators are line regulators designed to reduce elevated 2 PSI line pressure down to standard appliance pressure (usually 8'' w.c.) They feature factory-approved vent limiters and allow for the installation of smaller diameter gas piping to feed your connected appliances safely and efficiently. 

    Key Regulator Specs & Models

    • Function: Steps down elevated 2 PSI pressure to an outlet pressure of roughly 8'' water column for indoor appliances. 
    • Integrated Limiters: Includes factory-approved vent limiters. They eliminate the need for running costly vent lines to the outside, provided you follow local and national fuel gas codes. 
    • Common Models:
      • FGP-REG-3: Designed for smaller loads (capacity up to 250 MBTU/h).
      • FGP-REG-5A / FGP-REG-5P: Standard intermediate sizes (supporting loads up to 550 MBTU/h), usually configured with 3/4'' connections.
      • FGP-REG-7L: Designed for heavy-duty residential or commercial applications (up to 1059 MBTU/h) with 1'' connections. 
    Opis
    • Part Number     Capacity
           MBTU/h**
           Size     Weight Lbs.
      FGP-REG-3     250     1/2″     .8
      FGP-REG-3P     368 LP     1/2″     .8
      FGP-REG-5A     550     3/4″     1.9
      FGP-REG-5P     836 LP     3/4″     1.9
      FGP-REG-7L     1000     1″
          1.6

      **Capacity is total load as line pressure regulator. (Capacity decreases for single appliance load. Contact factory.)

    Specyfikacja techniczna
    • Nr referencyjnytracpipe-regulator-2-psi-tracpipe-system
    • Rodzina produktuFlexible Gas Piping Systems
    • Grupa produktuRegulator, 2 PSI
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-07-01
    • Numer edycji1
    Klasyfikacja
    • Kategoria BIMobjectHVAC - Rurociągi HVAC

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit