Opublikuj swoje produkty
Toilet cisterns PUCCI ® eco ® 9l -4l MODULO
Toilet cisterns PUCCI ® eco ® 9l -4l MODULO
    Pucciplast

    Toilet cisterns PUCCI ® eco ® 9l -4l MODULO

    TO BE INSTALLED IN FRONT OF BRICK OR PREBUILT WALLS - FOR WALL MOUNTED BOWL 1323490201 

    FIELDS OF APPLICATION

    • Partial or total height front brick wall fixing
    • Light plasterboard walls
    • For wall mounted bowl
    • Two quantities water rinsing
    Opis
    • FEATURES AND EQUIPMENT - Polyethylene tank 8 cm total thickness - Anti-condensation - Plaster holder pre-built mesh - Front control with two quantities rinsing - Water connection from above misaligned on the left - 1/2” stop cock with support - 23 x 25 cm flush pipe and protection cap - Ø 60-40 mm rubber plug - From Ø 40 mm to Ø 45 extension socket, OR 143 and Ø 55-44 mm clamp - Gasket lubricant package - Foam protection for door and inner parts - Dust-painted selfstanding frame - Frame profile width 35 mm - Distance between bowl fitting holes 180/230 mm - 2 M12 threaded rods with bowl fixing nuts - Adjustable basic from 0 to 200 mm zinc-coated plates to be anchored - Basic revolving plates - Ø 110-90 mm reduction ring - Ø 90 mm PE flush curve with gasket - Ø 90 mm protection cap - Ø 90 mm extended sleeve with gasket - 2 washers with eccentric short joint for WC regulation - 2 protection caps - Fixing materials, brackets and plugs TECHNICAL DATA dynamic pressure 0,1-10 bar maximum water temperature 25°C rinsing quantity predetermined setting - out 9-4l long - rinsing regulation range 9-6l short - rinsing regulation range 4-3l
    Specyfikacja techniczna
    • Nr referencyjnyToiletcisternsPUCCIeco9l-4lMODULO
    • TypObiekt (jeden obiekt)
    • Data publikacji2026-01-16
    • Numer edycji1
    Klasyfikacja
    • Kategoria BIMobjectUrządzenia sanitarne - Spłuczki
    • Kod ETIMEC010864
    • Nazwa ETIMSurface-mounted flushing reservoir
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit