S.I.A.I.

LATERIZI ALVEOLATER BIO CLASSE 60

ALVEOLATER® lightweight blocks with horizontal holes are lightened clay bricks, characterized by a gross bulk density between 500 and 680 kg/m³ and a hole percentage of 55% ≤ φ ≤ 70%. They are suitable for building infill walls, including in seismic zones, with no load-bearing function. Their layer configurations are complemented by layers of insulating material (synthetic or mineral fiber) in a cavity or as external insulation ("cappotto"). ALVEOLATER® horizontal-hole clay blocks are "smooth" elements, produced in various sizes and thicknesses. Available thicknesses range from 10 to 35 cm.

Opis

Muratura in blocchi di laterizio alleggerito forato, tipo Alveolater® 60 marcati CE in cat I S.A.C. 2+ secondo UNI EN 771-1. Classificazione dei blocchi secondo ex UNI 8942: forato per tamponamento UNI BF 00- Classification of blocks according to standard UNI EN 771-1: LD Block dimensions: cm ……x cm …… and height of cm …… Dimensional tolerance ……… (T1, T2, Tm according to UNI EN 771-1) Tolerance range ……… (R1, R2, Rm according to UNI EN 771-1). Gross bulk density …………… kg/m³ Tolerance ……… (D1, D2, Dm according to UNI EN 771-1). Installation: horizontal holes with class M …… mortar Horizontal and vertical mortar joints. The blocks must have a hole percentage between 60 and 70%. The equivalent thermal conductivity of the block will be determined through the calculation set out in standard UNI EN 1745:2012, based on the conductivity value given in Table A1 of Appendix A of standard UNI EN 1745:2012 as a function of the bulk density of the raw material used, or on an experimental value obtained on the clays used at the production plant, according to the methods and testing frequency established by the aforementioned standard. All declared characteristics will be documented through the attestation required for CE marking purposes, indicating the Certification Body and the certificate number if manufactured under control system 2+. The U-value (thermal transmittance) must not exceed ……… W/m²K. The Sound Reduction Index Rw of the wall must be no lower than ……… dB, based on experimental testing or calculation. These performance characteristics may also be documented through a manufacturer's declaration, with specific reference to test reports and/or calculations.

Specyfikacja techniczna

Nr referencyjnyALVEOLATER
TypObiekt (jeden obiekt)
Data publikacji2026-09-08
Numer edycji1

Linki

Dodatkowe informacje

Zaprojektowano wWłochy
Wyprodukowano wWłochy

Klasyfikacja

Kategoria BIMobjectMateriały budowlane - Cegły i bloczki betonowe
Klasyfikacja IFCŒciana
OmniClass Number23-13 21 00
OmniClass TitleBlocks and Bricks

Dostępny w krajach:

Europa
Albania
Andora
Austria
Belgia
Białoruś
Bośnia i Hercegowina
Bułgaria
Chorwacja
Cypr
Czarnogóra
Czechy
Dania
Estonia
Finlandia
Francja
Gibraltar
Grecja
Guernsey
Hiszpania
Holandia
Irlandia
Islandia
Jersey
Liechtenstein
Litwa
Łotwa
Luksemburg
Macedonia Pólnocna
Malta
Man
Mołdawia
Monako
Niemcy
Norwegia
Polska
Portugalia
Rosja
Rumunia
San Marino
Serbia
Słowacja
Słowenia
Svalbard
Szwajcaria
Szwecja
Ukraina
Watykan
Węgry
Wielka Brytania
Włochy
Wyspy Alandzkie
Wyspy Owcze