Leak Defense Split System (LDS) - Compact - CLDS-C (single/dual)

For Stronger Compact Valve(s)

Features

• Typical dual application anti-scald hot/cold paired shutdown
• Compact actuator form factor allows installation in tight spaces (i.e. within 3.6” or larger stud walls)
• Full-port lead-free brass ball valve with stainless steel probe pipe
• Requires LDS-3-WCP or CCM to interact with the valve
• Probe Board Enclosure (PBE, see page 18) is required for some installations

Opis

Feature List

Connections	Input NPT male (0.75" - 1.5") Output NPT female
Wall Power	NEMA 5-15R 120 VAC (Non-GFI)*
Transformer	NEMA 5-15P IN: 120VAC OUT: 24VAC (10ft cable length)
Non-Continuous Max Power Draw	1 amp ea.**
Continuous Idle Power Draw	0.2 amp
Optional Pressure Sensor	Contact Sales
Valve Position Confirmation	Yes
Communication	RF: 433 MHz valve to WCP/CCM*** Wired: RS-485 (TIA/EIA-485)
Cable Specification	Belden 2413F (Plenum), 2412 (Riser), 2149A (Outdoor), OSP6F (Underground) or equivalent
Max Water Pressure	600 PSI (@ 176°F)
Max Water Temperature	366°F (@ 96 PSI)
Mid-Range Temp /Pressure	250°F / 400 PSI
Ambient Temperature Range	-10°C to +55°C (14°F to 131°F)
Actuator Torque	20NM (177 in-lbs)
Overload Torque Protection	Yes
Auto/Manual Modes	Yes, no tools required
Ball Valve	Lead-free, full port, blowout proof
Open/Close Cycle Time	6-20s (depending on size)
Actuator Enclosure	Polyamide 6 (PA6) IP66 Rating
Valve-to-Valve Distance	Max 20’ between valves, 10’ between valve and PBE
Certifications	UL 1951, CSA C22.2 No. 14, 18, NSF 61 & 372
Flow Sensitivity	Contact Sales (Size Dependent)