Opublikuj swoje produkty
Tekmar Smart Boiler Expansion 294EXP
Watts

Tekmar Smart Boiler Expansion 294EXP

The Smart Boiler Expansion 294EXP expands the Smart Boiler Control 294 in groups of four boilers up to a maximum of sixteen boilers. The 294EXP connects to the Smart Boiler Control 294 through a three-wire communication cable.

Features

  • LED status indicators for power, communication, each boiler and pump/valve
  • Expansion for 4 boilers
  • 3-wire communication
  • Boiler configuration selected by DIP switches
Opis
  • Specifications
    Agency ApprovalsCSA C US, FCC Part 15B, ICES-003 Class A
    Ambient ConditionsIndoor use only, 32 to 122 degrees F (0 to 50 degrees C), less than 90 percent RH Non-condensing, Altitude < 6560 feet (2000 m), Installation Category II, Pollution Degree 2
    Dimensions9" H x 8" W x 2-11/32" D (229 x 203 x 60 mm)
    Enclosure MaterialBlue ABS plastic
    Enclosure NEMA RatingNEMA 1
    Modulating Output0-10 V (dc) 500 ohms minimum load impedance / 4-20 mA 1 k ohms max load impedance
    Power Supply115 V (ac) plus / minus 10 percent, 60 Hz, 6W
    Pump Relay230 V (ac), 5A, 1/3 hp


    Specyfikacja techniczna
    • Nr referencyjnytekmar-294EXP
    • Rodzina produktuHVAC & Hot Water Solutions
    • Grupa produktuControls > Multi-Staging
    • TypObiekt (jeden obiekt)
    • Data publikacji2022-08-04
    • Numer edycji1
    Dodatkowe informacje
    • Zaprojektowano wKanada
    • Wyprodukowano wKanada
    Klasyfikacja
    • Kategoria BIMobjectElektryka - Kontrola dostępu
    • Klasyfikacja IFCElement elektryczny
    • UNSPSC nameElectrical controls and accessories
    • UNSPSC code391215
    • Uniclass 2015 CodePr_80_51
    • Uniclass 2015 DescriptionMeasuring and metering products
    • CSI MasterFormat 2014 Code26 09 16
    • CSI MasterFormat 2014 TitleElectrical Controls and Relays
    • OmniClass Number23-27 11 15
    • OmniClass TitleFlow Measuring Instrument And Controls
    • CSI UniFormat II CodeD3060
    • CSI UniFormat II TitleControls and Instrumentation

    Dostępny w krajach:

    Ameryka północna
    Kanada
    Stany Zjednoczone
    Biblioteka produktów BIMobject

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit