625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consist of a low lead bronze body and bronze bell housing, shall have separate access covers for the plunger and strainer screen and shall have a bolt to adjust the downstream pressure. The Pressure Reducing Valve shall reduce pressure in both flow and no-flow conditions. The bronze bell housing and access caps shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 600XL or 625XL.

Compliance

ASSE® Listed 1003
IAPMO® Listed
CSA® Certified
City of Los Angeles Approved
Meets the requirements of NSF/ANSI/CAN 61* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)

Features:

Sizes 3/4", 1"
Maximum working water pressure: 300 psi
Maximum working water temperature: 140°F
Reduced pressure range: (standard) 25 psi to 75 psi
Factory preset: 50 psi
Hydrostatic test pressure: 300 psi

Opis

This valve directly replaces a single union competitor model 25AUB. Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring frequent cleaning because of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.
keywords: Wilkins 625XL, 625XL pressure reducing valve, pressure reducing valve with integral strainer, competitor replacement PRV, potable water pressure regulator, commercial water pressure reducing valve, residential pressure regulator, lead-free PRV, 625XL specification sheet

Specyfikacja techniczna

Nr referencyjny625XL
Rodzina produktuBuilding Drainage
Grupa produktuWater Hammer Arrestors
TypObiekt (jeden obiekt)
Data publikacji2026-08-28
Numer edycji1

Linki

Url produktuhttps://www.zurn.com/products/water-control/pressure-reducing-valves/625xl
Instrukcja montażuhttps://files.zurn.com/care-cleaning-install-warranty-sheets/is625xl.pdf
Opis technicznyhttps://files.zurn.com/spec-sheets/reg-625xl.pdf

Dodatkowe informacje

Materiał głównyBrąz
Zaprojektowano wStany Zjednoczone

Klasyfikacja

Kategoria BIMobjectHydraulika - Zawory

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze