Opublikuj swoje produkty
Wilkins 70XL Water Pressure Reducing Valve, 3/4" & 1", Lead Free*
Wilkins 70XL Water Pressure Reducing Valve, 3/4" & 1", Lead Free*
    Wilkins

    Wilkins 70XL Water Pressure Reducing Valve, 3/4" & 1", Lead Free*

    The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, of the direct-acting type, and ASSE® 1003 Listed. The integral bypass check valve main body and bell housing shall be cast bronze (ASTM B 584). The pressure reducing valve shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions using an adjusting bolt. All internal parts shall be corrosion resistant and included in a replaceable cartridge. The bronze bell housing shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 70XL.

    Compliance:

    • ASSE® Listed 1003
    • IAPMO® Listed
    • CSA® Certified 
    • City of Los Angeles Approved
    • Meets the requirements of NSF/ANSI/CAN 61 & 372* *(LESS THAN 0.25% WEIGHTED AVERAGE LEAD CONTENT)

    Features:

    • Sizes 3/4", 1"
    • Maximum working water pressure: 300 psi
    • Maximum working water temperature: 140°F
    • Reduced pressure range: 25 psi to 75 psi
    • Factory preset: 50 psi
    • Threaded connections (FNPT): ANSI B1.20.1
    • Copper connections (FC): ANSI B16.22
    • CPVC tailpiece Max. hot water temp.: 180°F @ 100 psi
    • Cold water rated temp.: 73.4°F @ 400 psi
    Opis
    • Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The unitized replaceable cartridge reduces time involved with cleaning and maintenance. The direct acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

      keywords: Pressure Reducing Valves,Lead-Free Products,Zurn Wilkins Water Control,Healthcare,Irrigation,Development,Civil,Transportation,Correctional/Institutional,Commercial,Food Service,Industrial/Processing Plant,Light Commercial,Residential Multi-Family,Residential/Light Commercial,Residential Single-Family,Sports Complex/Recreational Center,Waterworks,Zurn Wilkins Pressure Reducing Valves,Z-Bite™ Solderless Connections,Z-Press™ Solderless Connections,CA Mandatory Water Reduction,Lead-Free Law Compliance,MasterSpec,Retrofit and Replacement,Water Conservation,Zurn Wilkins,Model 70, 70,0XL,XL,12-70XL,1-70XL,34-70XL

    Specyfikacja techniczna
    • Nr referencyjnyzurn-70xl
    • Rodzina produktuPlumbing
    • Grupa produktuValves
    • TypObiekt (jeden obiekt)
    • Data publikacji2025-09-02
    • Numer edycji1
    Dodatkowe informacje
    • Materiał głównyBrąz
    • Materiał dodatkowyStal nierdzewna
    • Zaprojektowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectHydraulika - Zawory
    • Klasyfikacja IFCZawór
    • Uniclass 2015 CodePr_65_54_94_72
    • Uniclass 2015 DescriptionReduced pressure zone valves
    • CSI MasterFormat 2014 Code40 05 67
    • CSI MasterFormat 2014 TitleSpecialized Pressure and Flow-Control Valves
    • OmniClass Number23-27 31 47
    • OmniClass TitlePressure Regulating Valves

    Dostępny w krajach:

    Ameryka północna
    Anguilla
    Antigua i Barbuda
    Aruba
    Bahamy
    Barbados
    Belize
    Bermudy
    Brytyjskie Wyspy Dziewicze
    Curaçao
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze
    Biblioteka produktów BIMobject

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit