Opublikuj swoje produkty
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
    Wilkins

    Wilkins 950XL3 Double Check Valve, 3/4" - 2"

    Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. Assembly shall provide protection where a potential non-health hazard exists

    Compliance (Horizontal and Vertical)

    • ASSE® Listed 1015, Horizontal and Vertical Up
    • cUPC® Listed
    • CSA® Certified B64.5, Horizontal and Vertical Up
    • AWWA Compliant C510
    • UL® Classified (less shut-off valves)
    • C-UL® Classified
    • Approved by the Foundation for Cross Connection
    Control and Hydraulic Research at the University of
    Southern California
    • Meets the requirements of NSF/ANSI/CAN 61 and 372*
    *(Less than 0.25% Weighted Average Lead Content

    Features:

      • Compact and shortest bronze small backflow valve on the market allowing for installation versatility
      • All-bronze body ensures durability against the elements, with a Noryl®* check body and stainless-steel fasteners to resist corrosion over time.
      • EZSWAP® modular check with top access speeds up repairs and replacements
      • Test ports located on valve’s centerline make install and testing easy
      • Interlocking connected checks provide ¼ turn to access and disassemble.
      • Low-cost repair kits extend the lifespan at a significantly lower cost
      • Lead Free* (0.25% max. weighted average lead content)
      • ASSE Listed, UPC® Listed, Meets NSF/ANSI/CAN 61 & 372 requirements; Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California; Safe Drinking Water Act Compliant


        Opis
        • The Double Check Type Backflow Preventer shall be certified to NSF/ANSI/CAN 61, shall be ASSE Listed 1015, rated to 180°F, and supplied with full port ball valves. The main body and access cover shall be low lead bronze (ASTM B 584), the seat ring and all internal polymers shall be Noryl™ and the seat disc elastomers shall be silicone. The first and second check shall be located at an angle and accessible for maintenance from the top of the device, without removing the device from the line. The checks shall share a single access cover and test cocksshall be accessible from the top of the device. The Double Check Type Backflow Preventer shall be a ZURN
          WILKINS Model 950XL3

          Keywords:Thermal expansion tank,pressure relief valves,Double Check Backflow Preventer,backsiphonage,Cross Connection Control,double check valve backflow preventer,shut-off valves,water thermal expansion,Double Check Backflow Assembly,cartridge assembly,inlet shut-off valve,EZSwap,shock arresters, 112-950XL3,114-950XL3,1-950XL3,2-950XL3,34-950XL3

        Specyfikacja techniczna
        • Nr referencyjnyzurn-950xl3
        • Rodzina produktuBackflow Preventers
        • Grupa produktuReduced Pressure Principle Assembly
        • TypObiekt (jeden obiekt)
        • Data publikacji2025-09-02
        • Numer edycji1
        Dodatkowe informacje
        • Materiał głównyBrąz
        • Zaprojektowano wStany Zjednoczone
        Klasyfikacja
        • Kategoria BIMobjectHydraulika - Zawory
        • Klasyfikacja IFCZawór
        • Uniclass 2015 CodePr_65_54_94_72
        • Uniclass 2015 DescriptionReduced pressure zone valves
        • CSI MasterFormat 2014 Code40 05 67
        • CSI MasterFormat 2014 TitleSpecialized Pressure and Flow-Control Valves
        • OmniClass Number23-27 31 47
        • OmniClass TitlePressure Regulating Valves

        Dostępny w krajach:

        Ameryka północna
        Anguilla
        Antigua i Barbuda
        Aruba
        Bahamy
        Barbados
        Belize
        Bermudy
        Brytyjskie Wyspy Dziewicze
        Curaçao
        Dominika
        Dominikana
        Grenada
        Grenlandia
        Gwadelupa
        Gwatemala
        Haiti
        Holandia Karaibska
        Honduras
        Jamajka
        Kajmany
        Kanada
        Kostaryka
        Kuba
        Martynika
        Meksyk
        Montserrat
        Nikaragua
        Panama
        Portoryko
        Saint Kitts i Nevis
        Saint Lucia
        Saint Martin
        Saint Vincent i Grenadyny
        Salwador
        Sint Maarten
        Stany Zjednoczone
        Trynidad i Tobago
        Turks i Caicos
        Wspólnota Saint-Barthélemy
        Wspólnota Terytorialna Saint Pierre i Miquelon
        Wyspy Dziewicze
        Biblioteka produktów BIMobject

        Aplikacja Design App dla Revit

        Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

        Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

        • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
        • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
        • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit