Arquivado

SB Decotherm S rolling shutter

Hörmann rolling shutter SB Decotherm S Steel section construction, double-skinned, PU-foamed, with counterbalance via tension spring assembly. With Environmental Product Declaration (EPD*) acc. to ISO 14025 and prEN 15804 *ift Rosenheim EPD-RR-0.4 Performance characteristics: CE marking according to EN 13241-1 Unfinished structural opening (width x height): 1000-5000 x 2000-4500 mm Application areas: Shopping centres, shop fitting, shop entrances, night doors, underground garages, collective garages, external rolling shutter

Especificação

Door curtain: Curtain profiles made of double-skinned, concave full hard steel profiles. Connected to each other via integrated hinges, PU-foamed. Plastic end pieces in each lath profile (slide guard) and wind locks as pull-out protection. Bottom edge made of double-skinned, deflection-resistant aluminium extrusion profiles with EPDM bottom seal. Optionally adjustable brush seal as lintel seal. Surface finish: Galvanized, micro-profiled on both sides. Optionally coil coating in RAL 9002 / RAL 9006 on both sides. Preferred or special colours on request. Door guide: Aluminium extrusions with side guide with guide channel, side guide slider profile and brush seal. Sheet steel panel galvanized, barrel made of galvanized stiffener with deflection limit of I/500 acc. to DIN 2458. Counterbalance via tension springs. Door operation: Manually operated ≤ 3,500 mm ≥ chain hoist. Optional shaft operator with impulse or press-and-hold control on request. Fitting: Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door. Application areas: Shopping centres, shop fitting, shop entrances, night doors, underground garages, collective garages, external rolling shutter

Especificação técnica