Архив

Access E Motorized Projection Screen

The Access/Series E is a motorized screen for ceiling-recessed installation during the “dirty” phase of the construction process. This keeps the screen safe until you install the projector. The screen (motor-in-roller and attached viewing surface) then installs in seconds with preset latching roller brackets and electrical pin connectors. This eliminates job site damage. The bottom closure panel can hang in place when opened, or can be easily removed, for easy access to the interior of the case. Adjustable or removable hoisting brackets are included to allow for easy lifting during installation. Available through 16' wide.

Cпецификация

Projection screen for recessed ceiling mounting. Case back, top, and front constructed of steel. Endcaps are steel. Bottom panel forms slot for passage of viewing surface, easily removable for access. Symmetrical housing to allow for left or right-hand motor location, and for viewing surface to unroll from the back or front of the roller. Case to include bottom flange for trim around edges of ceiling opening. Case may be mounted with 3/8" threaded rod, with lag screws through brackets, or with wire in a grid ceiling. Mounting brackets slide in 18" long channels on top of case, allowing brackets to be moved to avoid interference with conflicting building structures. Brackets may be locked in position by tightening screws. Brackets may also be angled to meet installation requirements. Roller/fabric assembly may be installed in case at factory or job site. Brackets supporting roller/fabric assembly to slide in track inside top of case, allowing viewing surface to be centered in case regardless of screen size. Roller of 3" dia. steel. Top of HDTV and 16:9 format viewing surfaces through 110" diagonal masked by 12" black drop. Viewing surface flame and mildew resistant. Matt White XT1000E and Contrast Grey XH800E viewing surfaces are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg. Electrically operated 110-120V AC, 60 Hz. 4-wire motor mounted inside screen roller, 1.1 amp current draw, instantly reversible, lifetime lubricated, with internal thermal overload protector and electric brake, standard motor with preset accessible switches. Optional Quiet Motor operates at 44 Db (motor noise is approximately 30% less than standard tubular motors). Housing to feature internal junction box, allowing it to be installed and wired to building supply wires at an early stage of construction. Junction box to have plug-in style connector, accepting the mating half of the connector from the motorized roller/fabric assembly. 3-position control switch (or switches—specify number) to stop or reverse screen at any point. Switch(es) furnished with coverplate. Patented by Draper, Inc. Patent information available at http://www.draperinc.com/legal/patents/ Downloadable 3-part specifications are available at www.draperinc.com. Entire unit certified by Underwriters’ Laboratories for the U.S. and Canada. Plenum rated case (UL approved “Suitable for Use in Environmental Air Space”). Specifications subject to change without notice.

Техническая спецификация