Опубликуйте свои продукты
Model 1011.8HPS – Barrier-Free Chilled Dual Wall-Mount Fountain
Haws Corporation

Model 1011.8HPS – Barrier-Free Chilled Dual Wall-Mount Fountain

Model 1011.8HPS vandal-resistant electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

  • Optional 3000 gallon water filter available (model 6480)
  • Only stainless steel valve body that is machined out of solid bar stock
  • 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
  • Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
  • 100% lead-free waterways
  • Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
  • Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
  • Laminar flow prevents splashing, keeping the drinking area contained and clean
  • Maintenance is made easy with front access to valve adjustment and cartridge replacement
  • Beautiful polished finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.

Cпецификация
  • Model 1011.8HPS ADA vandal-resistant electric wall mounted water cooler shall include dual 18-gauge Type 304 polished stainless steel finish basins with integral swirl design, 14-gauge Type 304 high-polished stainless steel wall bracket, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valves with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, polished stainless steel finish back panel and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4" (3.2 cm) O.D. waste pipe. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 ) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5    REQUIRES MODELS 1011.8HPS, HCR8 & MTGFR.LG PURCHASED SEPARATELY.     FOR INDOOR USE ONLY

    Touchless sensor upgrades available—call Customer Service at (888) 640-4297:
    Single push button +$331, each additional +$107

Техническая спецификация
  • Уникальная ссылкаhaws-h1011_8hps
  • Тип продукцииDrinking Fountains/Coolers
  • Группа продукцииWall Mounted Drinking Fountains
  • ТипОбъект (один объект)
  • Дата публикации2020-11-05
  • Номер версии1
  • Высота (дюймы)39
  • Ширина (дюймы)32
  • Глубина (дюймы)19
Связанные
  • Основной материалНержавеющая сталь
  • Разработано вСоединенные Штаты Америки
  • Страна-производительСоединенные Штаты Америки
  • Масса нетто (фунт)56
Классификация
  • Категория BIMobjectСантехника - питьевые фонтаны
  • Классификация IFCСантехнический узел
  • Код Uniclass 2015Pr_40_20_87_24
  • Описание Uniclass 2015Drinking fountains
  • Код CSI MasterFormat 201422 47 13
  • Заголовок CSI MasterFormat 2014Drinking Fountains
  • Номер OmniClass23-31 31 00
  • Наименование OmniClassDrinking Fountains

Доступно в регионах:

Северная Америка
Канада
Соединенные Штаты Америки
Common.Footer.ValueProp.Image.AltText

Design App для Revit

Загружайте семейства прямо в модель Revit одним щелчком мыши

Получите место для более легкого доступа к новым объектам, хранения семейств Revit и совместной работы с вашей командой.

  • ГалочкаРаботайте напрямую с BIM-объектами рядом с Revit
  • Галочка 2 ГБ в облачном хранилище — храните свой контент Revit
  • Галочка Получите оценку жизненного цикла (A1–A3) воплощенного углерода прямо из Revit