Sjöstad Park bench

Dimensions and weight

Length: Bänk 175 cm
Sitting height: Bänk 50 cm
Depth: Bänk 53 cm
Vikt: 45 kg

Individual dimensions
The front legs: 40 mm x 40 mm
The back legs: 40 mm x 50 mm
The sub-frame is made in square pipe: 30 mm x 60 mm

Sjöstad park bench

Length: 175 cm
Height: 86 cm
Armrest height: 71 cm
Sitting height: 46cm
Depth: 53 cm
Vikt: 45kg

Individual dimensions
The front legs: 40 mm x 40 mm
The back legs: 40 mm x 50 mm
The sub-frame is made in square pipe: 30 mm x 60 mm
Back slats: 118 x 32 mm
Seat: Wood components: 92 x 32 mm

Sjöstad park bench

Length: 140 cm
Width: 70 cm
Height: 72,5 cm

Individual dimensions
The front legs: 40 mm x 40 mm
The back legs: 40 mm x 50 mm
The sub-frame is made in square pipe: 30 mm x 60 mm

Product numbers and combinations

U20-834 fastening irons, stainless steel

B11-06Startup cost for powder coating steel in a color other than standard. Choose a RAL colour.

B11-07Starting cost for another color of wood. Choose brown or grey for Linax or an NCS color for painted wood. If you want the same color on both steel and wood, choose the RAL color for both.

U2-80 Sjöstad backed bench

U20-81 Sjöstad bench

U20-82 Sjöstad table

Append to product number

WOOD AND FINISH

EK for oiled oak.
MH for oiled mahogany.
A for painted pine RAL 8028.
C for any color other than standard, starting cost is added.

METAL SURFACE FINISH

C for any color other than standard, starting cost is added.
Choose a RAL colour.

INSTALLATION TYPE

N for surface mount.

Standard colours

RAL 8028

Gris 2900 Sablé

Materials and surface treatments

The seat and backrest or made in painted pine in RAL 8028, oiled oak or FSC- mahogany
The sub-frame and all legs are made in square pipe. All steel is zinc-electroplated and powder-coated. All screws are stainless steel. The standard colour is anthracite grey, Gris 900 Sablé.

Steel

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated. This is done through electro-galvanization and powder coating, hot-dip galvanizing, or application of a zinc powder primer.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Pine

Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.

Mahogany - FSC-certified

FSC-marked mahogany is a wood with good durability in the outdoor environment. In addition, it retains its color tone better than, for example, oak and teak. Mahogany lives and moves, sometimes more than teak.

Oak

Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.

Wood oil

Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.

Water-based glaze

Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.

Assembly and placement

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Partly assembled. The seat and backrest should be attached to the frame with enclosed bolts.

Maintenance

Powdercoated steel

Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.

Oiled oak

Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.

Oiled mahogany

Oiled mahogany should be oiled two times a year.

Water-based glazed pine

Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.

Download our general maintenance advice

Versions

Teak on pine, oiled oak or FSC- mahogany.

Character

Sjöstad provides additional support along the armrests and backrest, giving those who need assistance an independent means of sitting down and standing up.