625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

625XL Water Pressure Reducing Valve with Integral Strainer - Competitor Replacement Length

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consist of a low lead bronze body and bronze bell housing, shall have separate access covers for the plunger and strainer screen and shall have a bolt to adjust the downstream pressure. The Pressure Reducing Valve shall reduce pressure in both flow and no-flow conditions. The bronze bell housing and access caps shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 600XL or 625XL.

Compliance

ASSE® Listed 1003
IAPMO® Listed
CSA® Certified
City of Los Angeles Approved
Meets the requirements of NSF/ANSI/CAN 61* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)

Features:

Sizes 3/4", 1"
Maximum working water pressure: 300 psi
Maximum working water temperature: 140°F
Reduced pressure range: (standard) 25 psi to 75 psi
Factory preset: 50 psi
Hydrostatic test pressure: 300 psi

Cпецификация

This valve directly replaces a single union competitor model 25AUB. Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring frequent cleaning because of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.
keywords: Wilkins 625XL, 625XL pressure reducing valve, pressure reducing valve with integral strainer, competitor replacement PRV, potable water pressure regulator, commercial water pressure reducing valve, residential pressure regulator, lead-free PRV, 625XL specification sheet

Техническая спецификация

Уникальная ссылка625XL
Тип продукцииBuilding Drainage
Группа продукцииWater Hammer Arrestors
ТипОбъект (один объект)
Дата публикации2026-08-28
Номер версии1

Ссылки

Ссылка на продукциюhttps://www.zurn.com/products/water-control/pressure-reducing-valves/625xl
Инструкции по монтажуhttps://files.zurn.com/care-cleaning-install-warranty-sheets/is625xl.pdf
Техническое описаниеhttps://files.zurn.com/spec-sheets/reg-625xl.pdf

Связанные

Основной материалBronze
Разработано вСоединенные Штаты Америки

Классификация

Категория BIMobjectСантехника - Клапаны

Доступно в регионах:

Северная Америка
Ангилья
Антигуа и Барбуда
Аруба
Багамы
Барбадос
Белиз
Бермуды
Бонэйр
Британские Виргинские острова
Виргинские Острова
Гаити
Гваделупа
Гватемала
Гондурас
Гренада
Гренландия
Доминика
Доминиканская Республика
Канада
Коста-Рика
Куба
Кюрасао
Мартиника
Мексика
Монтсеррат
Никарагуа
Острова Кайман
Острова Теркс и Кайкос
Панама
Пуэрто-Рико
Сальвадор
Сен-Бартелеми
Сен-Мартен
Сен-Пьер и Микелон
Сент-Винсент и Гренадины
Сент-Китс и Невис
Сент-Люсия
Синт-Мартен
Соединенные Штаты Америки
Тринидад и Тобаго
Ямайка