Опубликуйте свои продукты
2641 Sequential mechanical basin mixer
2641 Sequential mechanical basin mixer
    DELABIE
    Архив

    2641 Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Sequential mechanical mixer: opens and closes with cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed that the water flows through these tubes reduces the development of biofilm considerably. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals. Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Техническая спецификация
    • Уникальная ссылка2641
    • Тип продукцииSanitary
    • Группа продукцииBasin mixer
    • ТипОбъект (один объект)
    • Дата публикации2021-06-11
    • Номер версии1
    • Высота (мм)175
    • Ширина (мм)215
    • Глубина (мм)282
    Ссылки
    Связанные
    • Основной материалЛатунь
    • Разработано вФранция
    • Страна-производительФранция
    • Масса нетто (кг)1959
    Классификация
    • Категория BIMobjectСантехника - Краны/вентили/латунная фурнитура
    • Классификация IFCСантехнический узел
    • Код ETIMEC011328
    • Название ETIMWashbasin mixing tap
    • Код Uniclass 2015Pr_40_20
    • Описание Uniclass 2015Sanitary fittings and accessories
    • Код CSI MasterFormat 201441 14 33
    • Заголовок CSI MasterFormat 2014Mixers
    • Номер OmniClass23-31 11 00
    • Наименование OmniClassFaucets
    Common.Footer.ValueProp.Image.AltText

    Design App для Revit

    Загружайте семейства прямо в модель Revit одним щелчком мыши

    Получите место для более легкого доступа к новым объектам, хранения семейств Revit и совместной работы с вашей командой.

    • ГалочкаРаботайте напрямую с BIM-объектами рядом с Revit
    • Галочка 2 ГБ в облачном хранилище — храните свой контент Revit
    • Галочка Получите оценку жизненного цикла (A1–A3) воплощенного углерода прямо из Revit