Опубликуйте свои продукты
Torin™ Commercial Air-to-Water Heat Pump Water Heater
Torin™ Commercial Air-to-Water Heat Pump Water Heater
Torin™ Commercial Air-to-Water Heat Pump Water Heater
    Raypak

    Torin™ Commercial Air-to-Water Heat Pump Water Heater

    Engineered to Endure. Trusted to Perform.

    Built to meet today’s commercial hot water demands, TorinTM delivers high efficiency, sustainable
    performance, and dependable cold‑climate operation—paired with a space‑saving design well suited
    for tight mechanical rooms and retrofit applications. As the only solution in its class proven to deliver hot
    water at lower ambient temperatures, TorinTM gives businesses confidence their hot water needs will be
    met, wherever reliability matters most.

    Key Benefits

    • Performs in extreme conditions—operates efficiently in ambient temperatures as low as -13°F (-25°C).
    • Achieves COP up to 4.5, reducing energy costs significantly.
    • Energy Star® Certified for compliance and rebates.
    • Its compact design delivers a leading footprint—on average 36% smaller than major competitors. (Based on overall unit footprint compared to the average of comparable models using published specifications.
    • Sky-35 touchscreen interface for easy setup and monitoring. Simplifying operation for installers and facility operators.
    • Indoor/outdoor ready with single or Multipass piping options to fit a wide range of system designs.
    • Cascade up to 16 units for redundancy and higher capacity.
    • Engineered for a wide range of applications — this system delivers reliable domestic hot water and space heating.

    Ideal Applications

    • Hotels & Hospitality - High Demand
    • Schools & Universities - Campus Wide
    • Government & Office Buildings - Energy-focused
    • Multifamily Housing - Retrofit-Ready
    Cпецификация
    • Raypak Model — RMHPHDA068VD000

      • Electrical Input:
        • Voltage/Phase: 480V / 3 Phase / 60Hz
        • Full Load: 25A
        • MCA: 33.5A
        • Overcurrent protection device size: 40A
        • Refrigerant: R454b
        • Heating Capacity: 68,000 BTU/hr*
        • Power Input: 4.9 kW
        • COP*: 4.5
        • Noise Level: 75 dBa @ 10ft
        • Rated Load Amps @ DOE Conditions: 8.5A
      • Technical Data:
        • Compressor — Type: Inverter | Number Per Unit: 1 | FLA: 25 | Pole/RPM: 6P/7200
        • Fan — Type: Axial | Number Per Unit: 1 | FLA: 2.5 | Pole/RPM: 2/1100 | Air Flow: 6000 CFM
        • Max Static Pressure for Ducting: 0.15" W.C.
        • Heat Exchanger (Water Side):
        • Type of Water Tube: Double Wall - 316L Stainless Steel
        • Design: Counter Flow Brazed Plate
        • Flow Rate Excl. By Pass: 5–15 gpm
        • Max Outlet Water Temp: 150°F
        • Design Pressure Drop: 4.5 PSI
        • Max Operating Pressure**: 65 PSI
      • General Information:
        • Water Connections: 1" Copper
        • Drain: 1 1/4 socket connection
        • Defrost: Hot Gas Injection
        • Cabinet Construction: 18 Gauge painted commercial steel outdoor specs
        • Approx. Shipping Weight: (not shown in this column — value cut off in screenshot)
        • Size L x W x H: 40" x 40" x 42"

      Raypak Model — RMHPHDA120VD000

      • Electrical Input:
        • Voltage/Phase: 480V / 3 Phase / 60Hz
        • Full Load: 34A
        • MCA: 44.8A
        • Overcurrent protection device size: 50A
        • Refrigerant: R454b
        • Heating Capacity: 120,000 BTU/hr*
        • Power Input: 9.8 kW
        • COP*: 4.5
        • Noise Level: 75 dBa @ 10ft
        • Rated Load Amps @ DOE Conditions: 12.5A
      • Technical Data:
        • Compressor — Type: Inverter | Number Per Unit: 1 | FLA: 34 | Pole/RPM: 6P/7200
        • Fan — Type: Axial | Number Per Unit: 1 | FLA: 2.5 | Pole/RPM: 2/1100 | Air Flow: 6000 CFM
        • Max Static Pressure for Ducting: 0.15" W.C.
        • Heat Exchanger (Water Side):
        • Type of Water Tube: Double Wall - 316L Stainless Steel
        • Design: Counter Flow Brazed Plate
        • Flow Rate Excl. By Pass: 5–20 gpm
        • Max Outlet Water Temp: 150°F
        • Design Pressure Drop: 2.5 PSI
        • Max Operating Pressure**: 65 PSI
      • General Information:
        • Water Connections: 1" Copper
        • Drain: 1 1/4 socket connection
        • Defrost: Hot Gas Injection
        • Cabinet Construction: 18 Gauge painted commercial steel outdoor specs
        • Approx. Shipping Weight: 483 lbs
        • Size L x W x H: 40" x 40" x 58"
    Техническая спецификация
    • Уникальная ссылкаtorin-commercial-air-to-water-heat-pump-water-heater
    • Тип продукцииCommercial Water Heating
    • Группа продукцииAir To Water Heat Pump Water Heater
    • ТипОбъект (один объект)
    • Дата публикации2026-08-20
    • Номер версии1
    • Высота (дюймы)38.75
    • Ширина (дюймы)23.06
    • Глубина (дюймы)49.25
    Связанные
    • Основной материалСталь
    • Разработано вСоединенные Штаты Америки
    • Страна-производительСоединенные Штаты Америки
    • Масса нетто (фунт)500
    Классификация
    • Категория BIMobjectСантехника - Водонагреватели
    • Код Uniclass 2015Pr_60_60_96
    • Описание Uniclass 2015Water heaters
    • Код CSI MasterFormat 201422 33 36.16
    • Заголовок CSI MasterFormat 2014Commercial Storage Electric Domestic Water Heaters
    • Номер OmniClass23-31 29 00
    • Наименование OmniClassHot Water Heaters

    Доступно в регионах:

    Северная Америка
    Соединенные Штаты Америки
    Common.Footer.ValueProp.Image.AltText

    Design App для Revit

    Загружайте семейства прямо в модель Revit одним щелчком мыши

    Получите место для более легкого доступа к новым объектам, хранения семейств Revit и совместной работы с вашей командой.

    • ГалочкаРаботайте напрямую с BIM-объектами рядом с Revit
    • Галочка 2 ГБ в облачном хранилище — храните свой контент Revit
    • Галочка Получите оценку жизненного цикла (A1–A3) воплощенного углерода прямо из Revit