See-saw Pump made of stainless steel | Playground Equipment | Water Pump

Technical information

Housing of the pump completely made of stainless steel, glass bead blasted. Tread surface of embossed sheet.

Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary

Holding tube made of metal tube with a diameter of 42 mm. The type of the See-saw Pump and the water connection depend on the local situation. Required diameter for external water supply 1 inch; compression-proof or vacuum-suitable pipe diameter 1 inch; water requirement approx. 15 l/min.

• Height: 1.25 m
• Length: 1.00 m
• Width: 0.40 m
• Max. pedestal height: 0.45 m
• Weight: 110 kg

Components

• 1 See-saw Pump with foundation frame and coupling set

For areas with intense solar radiation, a wooden deck for the tread surface is available to reduce heating-up.

Installation information

Surfacing requirements
Reinforced surface. When planning the installation, ensure the Spray Head or a similar outlet (e.g. rock fountain) is located at a level no lower than the See-saw Pump, otherwise water will run through permanently.

Foundations

• 1 item: 90 x 35 x 50 cm
• Excavation depth: 50 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.

For use in aggressive environments such as salt or chlorine water, the equipment is also available in marine grade steel (V4A).