Для работы нашего сервиса используется информацию из файлов cookies

Соглашаясь на использование нашего сервиса, вы соглашаетесь с использованием файлов cookies.

AT Ytong Monolithic wall - premium U=0,19 W/(m²K) d=424 mm

Уникальная ссылка: COM_AT_Y_premium_monolithic_d_424
Брэнд: Ytong
Тип продукции: Ytong AAC
Группа продукции: Composite
Ширина (мм): 1000
Высота (мм): 1000
Глубина (мм): 424
Дата публикации: 2017-09-14
Номер версии: 1
Тип: Объект (один объект)
Загрузить (8)
The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Wall kit for load-bearing premium monolithic walls, made of Ytong Thermoblock plus PV 2-0,35 units d=400 mm.

Construction - U=0,19 W/(m²K)

15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
400 mm Ytong Ytong Thermoblock plus PV 2-0,35 GTIN: 405464032873
6 mm Reinforcement layer plaster with mesh / reinforcement fabric
3 mm Silicone-resin plaster

During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.

Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 2.5 N/mm²
Characteristic masonry compressive strength fK = 1.63 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 3.78 kN/m³
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (construction) Rw = 44.7 dB
Fire resistance class REI-M 90

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.


Основной материал: Autoclaved aerated concrete
Вспомогательный материал: Plaster
Разработано в: Austria
Страна-производитель: Austria

Категория BIMobject: Walls - External Walls
Классификация IFC: Wall
Название по ССКПУ ООН: Bricks
Код ССКПУ ООН: 301316
Uniclass 1.4 Код: L83122
Uniclass 1.4 Описание: Wall units
Uniclass 2.0 Код: SS-25-13-50
Uniclass 2.0 Описание: Masonry Wall Systems
Uniclass 2015 Код: Ss_25_13_50
Uniclass 2015 Описание: Masonry wall systems
NBS Reference Код: 25-13-50
NBS Reference Описание: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
Номер OmniClass: 23-13 35 21 13
Наименование OmniClass: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
Продукция доступна в:
Europe
  • Austria

Все объекты BIM objects подтверждаются и утверждаются реальными производителями и представляют собой реальную продукцию