Соглашаясь на использование нашего сервиса, вы соглашаетесь с использованием файлов cookies. Вот !

Я согласен

CH Ytong P 200 + ETIC Multipor U=0,16 W/(m²K) d=419 mm

Уникальная ссылка: COM_CH_Y_P_200_Multipor_U_0-16_d_419
Брэнд: Ytong
Тип продукции: Ytong AAC
Группа продукции: Composite
Ширина (мм): 1000
Высота (мм): 1000
Глубина (мм): 419
Дата публикации: 2018-03-19
Номер версии: 1
Тип: Объект (один объект)
Загрузить (10)
The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

- Thermal conductivity from λ = 0.14 W/(mK)
- Homogeneous, isotropic
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Construction - U = 0,16 W/(m²K):

- 5 mm Multipor lightweight mortar as internal plastering - GTIN: 4054649000590
- 200 mm Ytong P - GTIN: 4054640029682
- 5 mm Multipor lightweight mortar as adhesive layer - GTIN: 4054649000590
- 200 mm Multipor WAP - GTIN: 4054644001080
- 5 mm Multipor lightweight mortar as reinforcement layer - GTIN: 4054649000590
- 3 mm Multipor lightweight mortar as finish render (floated) - GTIN: 4054649000590
< 1 mm Multipor silicate facade paint

The planning and execution of the masonry must take account of the cantonal building regulations and building laws (for example MuKEn), the corresponding standards of the SIA, as well as statutory and private law requirements (the law of obligations).

Technical characteristics of the Ytong masonry:
Dry bulk density: ρ = 580 kg/m³
Characteristic masonry compressive strength: fxk = 4.0 N/mm²
Design value of masonry compressive strength: fxd = 2.0 N/ mm²
Characteristic masonry bending tensile strength ffxk = 0.30 N/mm²
Characteristic shear modulus of the masonry: Gk = 1.50 kN/mm²
Design value of the modulus of elasticity: Exd = 2.0 kN/mm²
Calculated thermal conductivity λ = 0.14 W/(mK)
Heat storage capacity c = 1000 J/kg K
Weighted sound reduction index (masonry plastered on both sides) Rw = 45 dB
Fire resistance class REI-180

Technical characteristics of the Multipor insulation board WAP:
Calculated thermal conductivity λ = 0.045 W/(mK)*
Compressive strength ≥ 300 kPa
Tensile strength ≥ 80 kPa
Shear strength ≥ 30 kPa/m²
Water absorption:
Short-term (24h) DIN EN 1609 Wp ≤ 2.0 kg/m²
Long Term (28d) DIN EN 12087 Wlp ≤ 3.0 kg/m²
Water vapor diffusion resistance factor μ = 3
Dry density 100 - 115 kg/m³
Fire behaviour acc. VKF fire protection application no. 23304 = A1

The present tool supports you in the planning of masonry made of Ytong Thermoblocks and applied thermal insulation with Multipor, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must be conform to local regulations. The use of the object must therefore be verified independently.

Основной материал: Aerated concrete
Вспомогательный материал: Plaster
Разработано в: Switzerland
Страна-производитель: Germany

Категория BIMobject: Стены - Наружные стены
Классификация IFC: Wall
Название по ССКПУ ООН: Bricks
Код ССКПУ ООН: 301316
Uniclass 1.4 Код: L83122
Uniclass 1.4 Описание: Wall units
Uniclass 2.0 Код: SS-25-13-50
Uniclass 2.0 Описание: Masonry Wall Systems
Uniclass 2015 Код: Ss_25_13_50
Uniclass 2015 Описание: Masonry wall systems
NBS Reference Код: 25-13-50
NBS Reference Описание: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
Номер OmniClass: 23-13 35 21 13
Наименование OmniClass: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
Продукция доступна в:
  • Switzerland

BIMobject SEEK Properties

Walls - External Walls

Название Значение
Depth 419
Insulation Thickness 400 mm
Insulation Type Ytong AAC (Autoclaved Aerated Concrete)
Intended Function Exterior wall with ETIC
Material Ytong AAC (Autoclaved Aerated Concrete)
Width 419 mm




This property set allows objects to be COBie UK BIM Level 2 classified

Название Значение
Material Ytong AAC (Autoclaved Aerated Concrete)