MasterLINE Corner Adapter_Busch-Jaeger
ABB

MasterLINE Corner Adapter_Busch-Jaeger

Electronic movement detector for detecting thermal motion. Remote operation via IR remote control 6841-101. Remote configurable via IR service remote control 6842-101. With display for detection and operation mode. With ground and rear-field detection. With high-quality lens for optimum detection. Detection sensitivity adjustable via IR service remote control. Surveillance density: 84 sectors with 336 switching segments. With integrated dismantling protection. All functions controlled by microprocessor. Continuous light (4 hours), light deactivation (4 hours) and presence simulation can be activated via IR remote control. Reading in the current brightness value as switching threshold via remote control. With automatic range stabilization. With automatic interference suppression. With automatic dazzle-proofing. With brightness-independent test mode for evaluating the detection zone. Individual adjustment of detection range via enclosed protective foil which can be cut to size. Additional possibility for switch-on via normally open push-button switch. Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec adjustable.
Teknisk specifikation
  • Unik ref.MasterLINE-corner-adapter_Busch-Jaeger
  • ProduktfamiljKNX Visualisation, Display and Signalling Device
  • ProduktgruppKNX range
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2020-12-21
  • Edition nummer1
  • Höjd (mm)115
  • Bredd (mm)125
  • Djup (mm)141
Relaterad
  • HuvudmaterialPlast
  • Vikt netto (kg)0.555
Klassificering
  • BIMobjektkategoriElektronik - Annat

Region tillgänglighet

Europa
Tyskland
Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

  • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
  • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
  • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit