WPM 300 - Water based Epoxy Membrane

WPM 300 - Water based Epoxy Membrane

WPM 300 is a two component, high build, water-based epoxy polyamide membrane/barrier coating with excellent resistant to hydrostatic pressure and good bond to damp surfaces. It is suitable for areas such as potable water tanks where a tough, hard wearing protective surface resistant to corrosion, chemical attack and bacterial growth is necessary.
Specifikation
  • WPM 300 @ 27 ± 1ºC Colour Grey/White Finish Semi-gloss and goes to matt on aging Volume solids 44% Mixing ratio 1:1 (Part A / Part B) by volume Pot life 2 hours @ 25ºC 1 hour @ 35°C Drying Times Recoat time 4 hours @ 25°C & 50% R.H. Full cure 7 days @ 25°C & 50% R.H. VOC content 26 g/l
Teknisk specifikation
  • Unik ref.WPM-300
  • ProduktfamiljWaterproofing Systems
  • ProduktgruppLIQUID APPLIED WATERPROOFING
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2020-01-06
  • Edition nummer1
Relaterad
  • HuvudmaterialEpoxi
  • Designad iIndien
  • Tillverkad iIndien
Klassificering
  • BIMobjektkategoriByggnadsmaterial - Tätskikt
  • IFC klassificeringFloor
  • UNSPSC namnStone or tile flooring
  • UNSPSC kod30161706
  • Uniclass 2015 kodPr_20_31_02_89
  • Uniclass 2015 beskrivningTile adhesives
  • CSI MasterFormat 2014 Kod09 60 00
  • CSI MasterFormat 2014 TitelFlooring
  • OmniClass nummer23-13 25 17
  • OmniClass TitelWaterproofing
  • CSI UniFormat II KodC3020
  • CSI UniFormat II TitelFloor Finishes

Region tillgänglighet

Asien
Indien
Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

  • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
  • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
  • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit