Publicera dina produkter

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

Powder based on special cements and plasticizers with good dispersion capacity and special fillers. Mixed with water, a smooth, self-leveling and pumpable mortar is obtained, which is workable 1/2 hour and passable in 2 hours. The mortar dries and hardens by hydration, without shrinkage, preventing the appearance of cracks.

Specifikation

Mixing ratio: Approx. 4 l. of water for 25 kg. of powder, which corresponds to approximately 1 vol. of water: 4 vol. of dust Density: Approx. 1.5 Kg / l. Density of the fresh mortar: Approx. 2.1 Kg / l. Material consumption: Approx. 1.7 Kg. Powder / m2 / mm. Open time: Approx. 25 minutes (at 20 ° C) Workability time (+ 20 ° C): Approx. 1/2 hour Sealing protection with ARDEX-COAT: After the pouring of the mortar Up to 10 mm: 1 day Up to 30 mm: 3 days Compressive strength: After 1 day: approx 14.0 N / mm2 After 7 days: approx 21.0 N / mm2 After 28 days: approx 32.0 N / mm2 Resistance to the flexotraction: After 1 day: approx 3.8 N / mm2 After 7 days: approx 5.5N / mm2 After 28 days: approx 8.8 N / mm2 Brinell Hardness: After 1 day approx. 63 N / mm2 After 7 days: approx 68 N / mm2 After 28 days: approx 95 N / mm2 Suitable furniture with wheels: Yes Packaging: Sacks of 25 kg. Net Storage: Approx. 12 months in dry places and in its original closed container.

Teknisk specifikation

Unik ref.ARDEX-IFS-MIX
ProduktfamiljSubfloor Preparation
ProduktgruppThicker Layer High Build Self-Leveling Underlayment
TypObjekt (enstaka objekt)
Publiceringsdatum2019-11-07
Edition nummer1

Länkar

Produkt-urlhttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html
Teknisk beskrivninghttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html

Relaterad

HuvudmaterialMortar
Designad iSpanien
Tillverkad iSpanien

Klassificering

BIMobjektkategoriGolv - Underlag
IFC klassificeringFloor
UNSPSC namnCarpet or rug underlays
UNSPSC kod30161719
Uniclass 2015 kodPr_35_31_06_80
Uniclass 2015 beskrivningSmoothing and levelling underlay compounds
CSI MasterFormat 2014 Kod06 16 26
CSI MasterFormat 2014 TitelUnderlayment
OmniClass nummer23-15 17 11 13 11 13
OmniClass TitelPortland Cement Floor Underlayments
CSI UniFormat II KodB1010
CSI UniFormat II TitelFloor Construction

Region tillgänglighet

Europa
Frankrike
Spanien

Liknande produkter

bild för ARDEX PC-T™ Polished Concrete Topping

ARDEX ARDEX PC-T™ Polished Concrete Topping

4.0 (5)

bild för ARDEX FL™ Rapid Set, Flexible, Sanded Grout

ARDEX ARDEX FL™ Rapid Set, Flexible, Sanded Grout

$bild för ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant$

ARDEX ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant

bild för ARDEX K 530™ Decorative Concrete Toping

ARDEX ARDEX K 530™ Decorative Concrete Toping

bild för ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

ARDEX ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

bild för ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping

ARDEX ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping

Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

Arbeta direkt med BIM-objekt bredvid Revit
2 GB molnlagring - lagra ditt Revit-innehåll
Få inbyggd kol-LCA (A1-A3) direkt från Revit