Vi använder cookies för att tillhandahålla våra tjänster

Genom att använda våra tjänster godkänner du att vi använder cookies

ASSA ABLOY OH1042S

Unique ref.: OH1042S
Tillverkare: ASSA ABLOY Entrance Systems
Produktfamilj: Industrial Doors
Produktgrupp: Overhead sectional doors
Datum för publicering: 2018-03-11
Versionsnummer: 1
Typ: Objekt (enstaka objekt)
Ladda ned (1)
With an opening speed of 1 meter per second to increase operational efficiency and save energy, the ASSA ABLOY OH1042S overhead sectional doors have been designed with a modified control system and reinforced construction to increase speed and thus improving the working environment, increases safety and greatly reducing energy expenses.

Model:
ASSA ABLOY OH1042S fully balanced sectional speed door with an operating speed of 1,0 m/s up and 0,7 m/s down.
Incorporating insulated door panels manufactured with a broken cold bridge to provide minimal thermal transmittance and reducing risk of condensation and ice formation. Optimized panel joint for even load distribution minimizing impact stress on panel hinges to prevent panel delamination and cracks. Door designed and tested for 100,000 opening cycles. Facilitates a tight seal throughout the life cycle of the door. Secured By Design certified. Diamond pattern exterior panel finish.

Dimensions
Clear opening width ….. … (2.000 mm - 5.000 mm)
Clear opening height …….. (2.750 mm - 5.000 mm)

Standard equipment:
Fully balanced, powder coated pre tensioned springs, designed for a minimum 20000 operating cycles, mounted on a 35 mm shaft with extra side bearings.
Flat maintenance free hinges made of composite material with a stainless steel pin.
Flat roller brackets with double rollers, no protruding parts on the door leaf.
EPDM perimeter and invisible horizontal joint seals.
Finger pinch protection to horizontal panel joints.

Performance:
To comply with European Standards
EN 12424 Wind resistance class 3 (width <4250mm) class 2 (width >4250mm).
EN 12425 Water penetration class 3 (70 pa resistance).
EN 12426 Air permeability class 3.
EN 12428 Thermal transmittance 1,0W (m².k).
DIN 4102 Fire performance class B2
EN 13241 CE marked with manufacturer’s declaration of conformity.
ISO 9001 Quality management
ISO 14001 Environmental management
Compliant with L2A Building Regulations.

Door panels:
545 mm deep, 42 mm thick process laminated steel panels with internal steel bands positioned to ensure proper fixation of hinges and roller brackets throughout the products life span. CFC free insulation giving an optimum panel u value of 0.4 W/m² K.
Panel design incorporates an external diamond profile steel skin for additional strength and aesthetic appearance with glossy finish at the section joints. Bottom profile equipped with oil resistant EPDM triple lip rubber seal to minimize leakage.

Finish as delivered:
Internal, monolithic, pre coated polyester to RAL 9002.
External pre coated polyester from ASSA ABLOY standard range:
RAL 1021 Rape Yellow, RAL 3002 Carmine Red, RAL 5010 Gentian Blue , RAL 6005 Moss Green, RAL 7016 Anthracite Grey, RAL 8017 Chocolate Brown, RAL 9002 White, RAL 9005 Jet Black, RAL 9006 Metallic Silver, RAL 9007 Silver Grey & RAL 9010 Pure White

Or Factory applied paint finish to the external face of the door panels in RAL ……..

All rubber sealants from EPDM rubber, temp. resistant -30/+70 Celsius
All steel components electro galvanized
All parts should be system specific, designed for purpose



Tracks:
2 piece galvanized tracks complete with 25 mm thermal movement provision.
Standard Lift (SL) 500 mm - 1000 mm head room
High Lift (HL) 500 mm - 1000 mm head room
Vertical Lift (VL) DLH + 525 mm

Operator:
Operating voltage: 230 V AC +/- 10%, 50 HZ (internal supply 3-phase 230 V AC) 0,85 kW.
Operating factor: ED = 30%, S3 10 min, non-continuous operation
(Motor operation 3 min, pause 7 min, direct-inverting)
Torque: max 80 Nm, depending on drum type and speed.
Fuse: 10 A
Brake: Electro-magnetic spring-loaded brake
Speed monitor: electronic monitoring
Freewheel / clutch: manual brake release.
Limit switch: electronic via encoder.
Gears: worm gear, not self-locking, max 140 RPM on door shaft. Shaft: ø35 mm tube or solid
No special wall reinforcement necessary
Temperature range: +5°C to 40°C
Soft stop, soft start FC controlled
Connection using "CEE plug" or lockable mains isolator
Maximum door weight 300 kg

Control unit:
1 x 230 V +/- 10% supply, 18 W. Dimensions: 300 x 400 x 165 mm (w x h x d) including control unit with standard actuator UP-STOP-DOWN and pulse control incl. self- monitoring of safety edge (light grid). Automatic closing, the door closes automatically after set period (0-240s).
Counter/error code display and servicing info display in top of control cabinet.
Protection class IP 54 with CEE-plug, IP 65 when wired.
Disengage device to be used in case of power failure is optional.

Safety device(s):
Spring break device
Safety factor 12 door cables
Stop and return photocell light grid

Locking mechanism:
Interlocked sliding bolt with lock bolt switch

Warranty:
1 YEAR / 2 YEAR / 3 YEAR / 4 YEAR / 5 YEAR extended manufacturer’s warranty available
to secure optimum performance and longevity.

Please consult ASSA ABLOY Entrance Systems technical literature for further details and the quotation for project specific notes.


Huvudmaterial:
Sekundärt material:
Designad i: Netherlands
Tillverkad i: Netherlands

BIMobject kategori: Doors - Industrial
Den här produkten är tillgänglig i:
Africa
  • Algeria
  • Angola
  • Benin
  • Botswana
  • Burkina Faso
  • Burundi
  • Cameroon
  • Cape Verde
  • Central African Republic
  • Chad
  • Comoros
  • Côte d'Ivoire
  • Democratic Republic of the Congo
  • Djibouti
  • Equatorial Guinea
  • Eritrea
  • Ethiopia
  • Gabon
  • Ghana
  • Guinea
  • Guinea-Bissau
  • Kenya
  • Lesotho
  • Liberia
  • Libya
  • Madagascar
  • Malawi
  • Mali
  • Mauritania
  • Mauritius
  • Mayotte
  • Morocco
  • Mozambique
  • Namibia
  • Niger
  • Nigeria
  • Republic of the Congo
  • Reunion
  • Rwanda
  • Saint Helena
  • São Tomé and Príncipe
  • Senegal
  • Seychelles
  • Sierra Leone
  • Somalia
  • South Africa
  • South Sudan
  • Sudan
  • Swaziland
  • Tanzania
  • The Gambia
  • Togo
  • Tunisia
  • Uganda
  • Western Sahara
  • Zambia
  • Zimbabwe
Europe
  • Albania
  • Andorra
  • Austria
  • Belarus
  • Belgium
  • Bosnia and Herzegovina
  • Bulgaria
  • Croatia
  • Cyprus
  • Czech Republic
  • Denmark
  • Estonia
  • Faroe Islands
  • Finland
  • France
  • Germany
  • Gibraltar
  • Greece
  • Guernsey
  • Hungary
  • Iceland
  • Ireland
  • Isle of Man
  • Italy
  • Jersey
  • Latvia
  • Liechtenstein
  • Lithuania
  • Luxembourg
  • Macedonia (FYROM)
  • Malta
  • Moldova
  • Monaco
  • Montenegro
  • Netherlands
  • Norway
  • Poland
  • Portugal
  • Romania
  • Russia
  • San Marino
  • Serbia
  • Slovakia
  • Slovenia
  • Spain
  • Svalbard and Jan Mayen
  • Sweden
  • Switzerland
  • Ukraine
  • United Kingdom
  • Vatican City
  • Åland Islands
Middle East
  • Afghanistan
  • Bahrain
  • Egypt
  • Iran
  • Iraq
  • Israel
  • Jordan
  • Kuwait
  • Lebanon
  • Oman
  • Palestine
  • Qatar
  • Saudi Arabia
  • Syria
  • Turkey
  • United Arab Emirates
  • Yemen

Alla BIM-objekt är riktiga produkter från riktiga tillverkare, bekräftade och godkända