Wilshire Planters, Steel Rectangle & Square
Wilshire Planters, Steel Rectangle & Square
    Tournesol

    Wilshire Planters, Steel Rectangle & Square

    Wilshire planters, our most popular collection, are available in powder-coated mild steel with a zinc-rich primer and stainless-steel base.

    Features

    • 12-gauge steel with stainless steel base
    • Engineered to resist deformation
    • Toe kick or full bottom options
    • Powder-coat over zinc-rich primer to reduce rusting
    • Drain holes standard

    Product Options

    Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options.  Note -  not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

    Specifikation
    • Guide Specification Section 

      129300 Site Furnishings Section
      129200
      Interior Planters
      Tournesol Siteworks Wilshire Steel Planters

      1.0 GENERAL 

      1.1 WORK INCLUDED 
      A. Provision of steel planters 

      1.2 RELATED WORK
      A. Section 033000 Cast-in-Place concrete
      B. Section 061000 Rough Carpentry
      C. Section 062000 Finish Carpentry 

      1.3 SUBMITTALS
      A. Product Data: Manufacturer's standard catalog cut sheets.
      B. Samples: As required for color selection or material thickness only.
      C. Shop Drawings: For custom applications, showing critical sizes and dimensions for installation and integration with other work. 

      1.4 DELIVERY, STORAGE AND HANDLING
      A. Unwrap and inspect planters after delivery for signs of damage during transit.
      B. Protect planters from damage during storage and handling.
      C. Store planters indoors if possible. Do not stand or walk on planters or planter liners. 

      1.5 PROJECT CONDITIONS
      A. Contractor to provide adequate structural support for planters. Unless otherwise specified, planters should have continuous basal support.
      B. Protect units from damage by adjacent work.

      2.0 PRODUCTS
      2.1 ACCEPTABLE PRODUCTS/MANUFACTURERS
      A. Wilshire Steel Planters, manufactured by Tournesol Siteworks LLC. 2930 Faber St., Union City, CA 94587 Tel: (800) 542-2282 FAX (510) 471-6243

      2.2 WILSHIRE STEEL PLANTERS
      A. Materials
      1. Weathering Steel Planters – ASTM A606 12 ga. (0.105”) sheet, formed and welded. ASTM A588 3/16” (0.1875”) may be substituted for custom projects where required. Wall reinforcement elements of the same material are attached as required.

      2. Powdercoated Steel Planters – Body ASTM A1011 hot rolled commercial carbon steel sheet, formed and welded. Wall reinforcement elements of the same material are attached as required. Floor ASTM A240 (304) stainless steel sheet with a 2B finish.

      B. Construction – WWRSP119, Rev. 1 Planter bodies to be formed and fully welded at vertical seams. Top lips, where applicable, to be press broke, seam welded. Lips on powdercoated carbon steel planters ground to smooth. Floor fastened water-tight to the body. The floor may be fastened with a 2” toe-kick/reveal, or flush to the bottom. Planters delivered with 1-5/8” drain holes unless specified otherwise.

      C. Performance characteristics – Vertical wall panels will not deform more than L/200 when loaded with 90 lbs/cu ft. soil media. Similar performance with heavier soil media is available by specification.

      D. Finish: specified finish; factory finished.
      1. Weathering Steel - unless otherwise specified, weathering steel planters finished to mill specification
      2. Carbon steel –
      a.: Following fabrication, the planter shall be cleaned and treated with an iron phosphate process before the coating application. This process shall include a non-chromated alkaline cleaner, and an iron phosphate treatment, followed with an acidic sealer for maximum adhesion. Corrosion-resistant zinc undercoat shall be applied, 1-2mils thick. The protective powder coat shall be polyester or polyester TGIC powder, a minimum 4 mils thick. Following application parts shall be baked until properly cured. b. Optional Tier-2 Finishes (Silvadillo, Jaguar Topaz): An additional clear overcoat of 1-2 mils 

      E. Sizes: Modular units fabricated to size by the manufacturer as required to fill specified areas. Refer to the catalog for standard sizes. Custom sizes as per approved shop drawings. 

      2.3 PLANTER OPTIONS
      A. Drainage hole factory drilled prior to delivery. Specify for planters without drain holes
      B. Scoop connections – adjacent planter walls may be lowered to allow multiple modular units to appear to be one continuous unit. Optional connection kits are also available, contact the manufacturer before ordering
      C. Custom accessory pockets are available for lighting, audio, electrical, or other elements. Submit a sample of specified housing with the order, and confirm size and location on shop drawings.
      D. Casters are available for most small- and medium-sized planters, using polyurethane wheels. Non-locking casters recessed in a planter, bottom of skirt approx.1/2” from the surface. B. Wilshire steel planters may be configured as Bioretention/Flowthrough planters, verify with the manufacturer before ordering. 

      3.0 EXECUTION 

      3.1 PREPARATION
      A. Before planter fabrication, the contractor shall verify the as-built dimensions of the planter area or receptacles to ensure the proper size, fit, and quantity required.1

      3.2 INSTALLATION
      A. Install planters to allow for easy removal if necessary. B. Provide continuous basal support. C. Install level to permit adequate drainage and irrigation.

    Teknisk specifikation
    • Unik ref.wilshire-planters-powder-coated-steel-rectangle-and-square
    • ProduktfamiljWilshire Collection
    • ProduktgruppWilshire Metal Planters
    • TypObjekt (enstaka objekt)
    • Publiceringsdatum2024-03-13
    • Edition nummer1
    Relaterad
    • HuvudmaterialStål
    • Designad iUSA
    • Tillverkad iUSA
    Klassificering
    • BIMobjektkategoriLandskapsarkitektur - Annat

    Region tillgänglighet

    Europa Nordamerika Asien Sydamerika
    Åland
    Amerikanska Jungruöarna
    Armenien
    Argentina
    Albanien
    Anguilla
    Azerbajdzjan
    Bolivia
    Andorra
    Antigua och Barbuda
    Bangladesh
    Brasilien
    Belgien
    Aruba
    Bhutan
    Chile
    Bosnien och Hercegovina
    Bahamas
    Brittiska territoriet i Indiska oceanen
    Colombia
    Bulgarien
    Barbados
    Brunei
    Ecuador
    Cypern
    Belize
    Filippinerna
    Falklandsöarna (Islas Malvinas)
    Danmark
    Bermuda
    Georgia
    Franska Guyana
    Estland
    British Virgin Islands
    Hongkong
    Guyana
    Färöarna
    Caymanöarna
    Indien
    Paraguay
    Finland
    Costa Rica
    Indonesien
    Peru
    Frankrike
    Curaçao
    Japan
    Surinam
    Gibraltar
    Dominica
    Julöarna
    Uruguay
    Grekland
    Dominikanska republiken
    Kambodja
    Venezuela
    Guernsey
    El Salvador
    Kazakstan
    Irland
    Grenada
    Kina
    Island
    Grönland
    Kokosöarna
    Isle of Man
    Guadeloupe
    Kyrgyzstan
    Italien
    Guatemala
    Laos
    Jersey
    Haiti
    Macao
    Kroatien
    Honduras
    Malaysia
    Lettland
    Jamaica
    Maldiverna
    Liechtenstein
    Kanada
    Mongoliet
    Litauen
    Karibiska Nederländerna
    Myanmar (Burma)
    Luxemburg
    Kuba
    Nepal
    Malta
    Martinique
    Nordkorea
    Moldavien
    Mexiko
    Pakistan
    Monaco
    Montserrat
    Singapore
    Montenegro
    Nicaragua
    Sri Lanka
    Nederländerna
    Panama
    Sydkorea
    Nordmakedonien
    Puerto Rico
    Tadzjikistan
    Norge
    Saint Christopher och Nevis
    Taiwan
    Österrike
    Saint Lucia
    Thailand
    Polen
    Saint Vincent och Grenadinerna
    Turkmenistan
    Portugal
    Saint-Barthélemy
    Uzbekistan
    Rumänien
    Saint-Martin
    Vietnam
    Ryssland
    Saint-Pierre-et-Miquelon
    San Marino
    Sint Maarten
    Schweiz
    Trinidad och Tobago
    Serbien
    Turks och Caicos Islands
    Slovakien
    USA
    Slovenien
    Spanien
    Storbritannien
    Svalbard
    Sverige
    Tjeckien
    Tyskland
    Ukraina
    Ungern
    Vatikanstaten
    Vitryssland