4DS 4.5″ DOWNLIGHT – SQUARE
4DS 4.5″ DOWNLIGHT – SQUARE

    4DS 4.5″ DOWNLIGHT – SQUARE

    FEATURES

    • Beam angles ranging from 25º narrow to 60º wide for tailored performance
    • 4 inch aperture is unobtrusive in small scale spaces
    • Square shape accentuates architectural styles
    • New construction mounting pan, IC-rated, or pan-less remodel kit available
    • Open reflector with seven finishes complements any interior style
    • Die-cast trim choices include flush, regressed or angled lens
    • Contemporary design provides glare-free illumination for a soft ceiling appearance
    • IP65-rated die-cast trim includes easy-to-clean flush lens
    • Fully room-side accessible
    • Title 24 | JA8 compliant
    • Spring clip retention system eliminates trim sag
    • Easily adjust mounting arms below ceiling to adapt to a range of ceiling thicknesses
    • Low UGR meets LEED and WELL requirements
    • Support human-centric design with adaptive, individualized lighting using tunable white light
    • Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
    • Build America, Buy America and Buy American Act compliant
    • Wireless in-fixture control solutions available
    • Made Right Here® in the USA
      Specifikation
      • Housing

        Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing- out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.

        Open Reflector

        Low-iridescent anodized aluminum with top diffuser.

        Lensed Trim

        Die-cast aluminum frame with micro-prismatic, acrylic lens.

        Electrical

        High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses.

        Mounting

        Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. Minimum 24″ O.C. marked spacing required for L40 lumen package.

        Listings

        • cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation.
        • Suitable for wet location under covered ceiling when specified with WET/CC option.
        • IP65 rated trim when specified with IP option.
        • IC-rated for direct contact with insulation when specified with I Mounting Type.
        • City of Chicago Environmental Air approved when specified with CP option.
        • Complies with ASTM-E283 when specified with ATH option.
        • RoHS compliant.
        • Title 24 (JA8) compliant in select configurations, see www.cacertappliances.energy.ca.gov.
        • Build America, Buy America (BABA) and Buy American Act (BAA) compliant.
        Request certification at hew.com/buy-american.

        Warranty

        5-year limited warranty, see details
      Teknisk specifikation
      • Unik ref.4ds-downlight-square
      • ProduktfamiljIndoor Luminaires
      • ProduktgruppDownlights
      • TypObjekt (enstaka objekt)
      • Publiceringsdatum2025-01-03
      • Edition nummer1
      Relaterad
      • HuvudmaterialMetall
      • Sekundärt materialGlas
      • Designad iUSA
      • Tillverkad iUSA
      Klassificering
      • BIMobjektkategoriBelysning - Takmonterad
      • IFC klassificeringLamparmatur
      • Uniclass 2015 kodEF_70_80
      • Uniclass 2015 beskrivningLighting
      • CSI MasterFormat 2014 Kod26 51 13
      • CSI MasterFormat 2014 TitelInterior Lighting Fixtures, Lamps, And Ballasts
      • OmniClass nummer23-35 47 11
      • OmniClass TitelLighting Fixtures

      Region tillgänglighet

      Nordamerika
      Amerikanska Jungruöarna
      Anguilla
      Antigua och Barbuda
      Aruba
      Bahamas
      Barbados
      Belize
      Bermuda
      British Virgin Islands
      Caymanöarna
      Costa Rica
      Curaçao
      Dominica
      Dominikanska republiken
      El Salvador
      Grenada
      Grönland
      Guadeloupe
      Guatemala
      Haiti
      Honduras
      Jamaica
      Kanada
      Karibiska Nederländerna
      Kuba
      Martinique
      Mexiko
      Montserrat
      Nicaragua
      Panama
      Puerto Rico
      Saint Christopher och Nevis
      Saint Lucia
      Saint Vincent och Grenadinerna
      Saint-Barthélemy
      Saint-Martin
      Saint-Pierre-et-Miquelon
      Sint Maarten
      Trinidad och Tobago
      Turks och Caicos Islands
      USA
      Common.Footer.ValueProp.Image.AltText

      Design App för Revit

      Ladda familjer direkt till din Revit-modell med ett klick

      Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

      • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
      • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
      • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit